Lancia Motor Club Forum Banner
10 December, 2019, 07:14:14 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Lambda 8th brakes  (Read 818 times)
0 Members and 1 Guest are viewing this topic.
appiaman
Senior Member
*****
Offline Offline

Posts: 130



« on: 18 April, 2019, 05:20:45 PM »

Hi guys do one need a puller to get the brake drums off?if yes what does it look like mine brakes making a horrible noise and my suspicion is the liners have come loose.
Need to get all 4 drums off.
Help
Very keen to use the car on the great northern weekend this year

Christo
Logged

Lancia lambda 8th series, Fulvia 1600 sport (1972)Fulvia1.6hf (1972), Lancia Flaminia gtl, Porsche boxter, Mini Cooper
JohnMillham
Rebel Poster
*
Offline Offline

Posts: 923



« Reply #1 on: 19 April, 2019, 07:11:53 AM »

Yes, you need a puller. You can borrow mine if you can arrange to collect it. Regards, John
Logged
Dikappa
Megaposter
*
Offline Offline

Posts: 267


« Reply #2 on: 19 April, 2019, 03:36:27 PM »

Sorry Christo, can't be of help!

John, would you mind posting some pictures of your puller?  Where does it attach?

Many thanks,

Koen
Logged
JohnMillham
Rebel Poster
*
Offline Offline

Posts: 923



« Reply #3 on: 21 April, 2019, 08:58:10 AM »

It fits in place of a wheel, having a right-hand thread in one side and a left-hand thread in the other.


* puller.jpg (1190.28 KB, 1538x1114 - viewed 95 times.)
Logged
Dikappa
Megaposter
*
Offline Offline

Posts: 267


« Reply #4 on: 21 April, 2019, 11:47:24 AM »

Brilliant!  That was what I was wondering about, the two threads....maybe a good addition to the consortium tools list?  I just ordered the tool for the front suspension, and it is extremely well done for a very decent cost.  I reckon if ten of these pullers where ordered in one go they could be made for very reasonable money...
Logged
Mikenoangelo
Member
****
Offline Offline

Posts: 86


« Reply #5 on: 21 April, 2019, 06:16:54 PM »

Probably worth asking around other Clubs as no doubt it is a very commonly needed tool for Rudge Whitworth hubs, I know the Bugatti Owners Club have supplied them in the past - probably a bit expensive though. What about asking one of the hub manufacturers such as Orson Equipment who show such a tool on their website.
http://www.orsonequipment.co.uk/accessories/

Mike
Logged
appiaman
Senior Member
*****
Offline Offline

Posts: 130



« Reply #6 on: 23 April, 2019, 02:07:45 PM »

I would prefer to buy one will make contact with them .
Wonder what size the thread should be .
Logged

Lancia lambda 8th series, Fulvia 1600 sport (1972)Fulvia1.6hf (1972), Lancia Flaminia gtl, Porsche boxter, Mini Cooper
the.cern
Permanent resident
**
Offline Offline

Posts: 1488


« Reply #7 on: 28 May, 2019, 01:31:06 PM »

For my Gussie I made pullers simply by welding short bars across surplus left side and right side spinners. The bar was drilled through and a nut welded on!! A nice long bolt and the job was done!! Very simple and very cheap, what's not to like!!!!

                            Andy
Logged
DavidLaver
Permanent resident
**
Offline Offline

Posts: 3912



« Reply #8 on: 28 May, 2019, 04:22:52 PM »


Andy - I'm going to remember that...  When I do the question will be if you do, and then where they might be.
Logged

David Laver, Lewisham.
the.cern
Permanent resident
**
Offline Offline

Posts: 1488


« Reply #9 on: 03 June, 2019, 09:12:50 AM »

...... where they might be? That is always a worry!!!!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines