Lancia Motor Club Forum Banner
28 March, 2024, 11:26:43 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1] 2 3   Go Down
  Print  
Author Topic: Appia Camioncino - new arrival  (Read 12187 times)
0 Members and 1 Guest are viewing this topic.
simonandjuliet
Permanent resident
**
Posts: 2538



« on: 08 March, 2019, 06:38:06 PM »

The camioncino has arrived !

The transporter was too big to get through the village so the camioncino was unloaded at the edge of the village and I towed it home with the tractor.

No brakes so you can see me carrying the means of stopping her !

Bit of work to do ........



* IMG_1938.jpg (341.5 KB, 960x1280 - viewed 428 times.)

* IMG_1939.jpg (536.33 KB, 1280x960 - viewed 458 times.)
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
stanley sweet
Lapsed
Permanent resident
**
Posts: 1149



WWW
« Reply #1 on: 08 March, 2019, 06:56:33 PM »

That's a nice addition to the fleet. Looks pretty good in the photos. Is there a lot to do? How are you going to get a 3RO through the village because you know it's only a matter of time....
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
Cassino
Member
****
Posts: 69


« Reply #2 on: 09 March, 2019, 10:32:35 AM »

She looks in great condition......Have I missed the history of this one?......

Ian
Logged

Delta Series 3. Appia Berlina Series 2.
Moto BM Zebretta. Moto Guzzi Leggera 65

Previous Lancias.
 Beta Berlina 1400,Delta 1300, Delta GT,Prisma 1500,Prisma 1600 IE, Dedra 1800, Dedra 2000.IESE.
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #3 on: 09 March, 2019, 08:59:14 PM »

The shiny paint hides a lot ! There is a fair amount to do, but the plan is to do floors , cills , brakes and engine and then see what happens ....

Quite a rare photo opportunity, a camioncino and furgoncino side by side - I had to move the furgoncino out of the garage to put the camioncino on the ramp - Not quite sure where I can put the legs to lift it though !

 



* IMG_1944.jpg (382.11 KB, 1280x960 - viewed 421 times.)
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #4 on: 17 March, 2019, 02:05:21 PM »

Quick update on this one.

I want to get the car running and at least stopping with the handbrake so I can move it around, so this week I have been trying to start the engine after 22 years of dormancy

The engine was not blocked, had clean oil (!) but no electricity

First job was remove and rebuild the starter motor, diesel down the bores because very low compressions and then a carb clean/rebuild

I by-passed all the electrics, cleaned the points and rest of the ignition and set up jump leads to the starter motor, with a separate lead to the front of the car to engage the solenoid. I also fitted a new petrol pump and new pipes, so no risk of crud from the tank.

Over the course of several days, each time establishing that the next bit worked, I took the heated plugs out of the oven, poured petrol down the carb, fitted a fresh battery and then after about 20 secs of cranking she started ......

I had had a few ignitions before, but she now ran for 30 secs - no more because no water in the engine yet - v good oil pressure and no rattles or nasty noises. Far better than expected !

After that I dismantled all the brakes so that she doesn't bind and can be moved more easily. Next is to check clutch/gearbox and steering etc


* IMG_2001.jpg (298.48 KB, 960x1280 - viewed 419 times.)

* IMG_2002.jpg (281.69 KB, 960x1280 - viewed 394 times.)

* IMG_2004.jpg (276.06 KB, 1280x960 - viewed 399 times.)

* IMG_2005.jpg (330.29 KB, 960x1280 - viewed 415 times.)
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
chriswgawne
Permanent resident
**
Posts: 2038



« Reply #5 on: 17 March, 2019, 04:34:21 PM »

Brilliant! Bit of a result there Simon.
I have been dealing with dodgy NGK plugs again, this time in our B12.
 This is the 3rd time in the last 5 years that new NGK BP6ES plugs have been found to be faulty. Very frustrating but there are all out of a batch I bought some years ago.
Chris
Logged

Chris Gawne
Mobile: 07778 216552
Jaydub
Megaposter
*
Posts: 344


« Reply #6 on: 17 March, 2019, 05:01:03 PM »

Great stuff Simon. I`m with you on the heated spark plugs, it certainly helps to ignite the mixture and partially prevent flooding.

Chris:- I recall NGK  having some issues with bad plugs a few years ago as well, but they are have been ok the last few years as far as I know.
Logged

1600 HF. S2.
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #7 on: 17 March, 2019, 06:31:47 PM »

Chris, I think the rest of them need to go in the bin (or put them on eBay !!)

Update on the Appia, filled with water and ran for 20 mins, so getting there slowly
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
Cassino
Member
****
Posts: 69


« Reply #8 on: 18 March, 2019, 11:20:56 AM »

Well, thats a result.....well done.
Not tempted by a pump with priming lever?......to overcome the drain back issue.

Ian
Logged

Delta Series 3. Appia Berlina Series 2.
Moto BM Zebretta. Moto Guzzi Leggera 65

Previous Lancias.
 Beta Berlina 1400,Delta 1300, Delta GT,Prisma 1500,Prisma 1600 IE, Dedra 1800, Dedra 2000.IESE.
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #9 on: 30 March, 2019, 10:20:13 AM »

Having started and run the engine, I have now stripped and removed all the brakes so she will move easily, plus i have taken the engine, 'box and prop out so I can start on the welding

Plan is to remove the front wings and doors, then tip it on its side and start the welding. Once I've done the worst bits, I can give her to Dog to make everything look pretty


* IMG_2009.jpg (322.52 KB, 1280x960 - viewed 449 times.)

* IMG_2046.jpg (309.13 KB, 960x1280 - viewed 388 times.)
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #10 on: 07 May, 2019, 05:27:01 PM »

Some progress here

Firstly a couple of scary photos of what I found when I took the doors and wings off - not unexpected and I can deal with most of it with a bit of time and thought.

The "A" posts are pretty shot at their base so I will have to make these carefully and in sections - I can't make complex curves, although I have also acquired a shrinker/stretcher for some sections

The floors and inner cills are very tatty, but floors are available (we made them for the Appia Consortium a couple of years ago) and much of the inner cill is flat metal .I bought a 1m metal folder to help with that

Plan is to replace floors, cills and A posts before turning on its side to tidy up underneath

Using a mix of gas, gasless MIG and inverter depending on the thickness of metal

Maybe do some more tomorrow if the rains arrive !





* IMG_2080.jpg (485.38 KB, 960x1280 - viewed 407 times.)

* IMG_2083.jpg (406.43 KB, 960x1280 - viewed 402 times.)

* IMG_2219.jpg (320.21 KB, 960x1280 - viewed 392 times.)

* IMG_2222.jpg (465.13 KB, 1280x960 - viewed 395 times.)
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
DavidLaver
Permanent resident
**
Posts: 4365



« Reply #11 on: 07 May, 2019, 11:33:03 PM »


When I saw Simon recently I discovered that folder is about a third the price I expected.  A few on ebay, but for example:

https://www.ebay.co.uk/i/283278025579?_trksid=p11010.c100415.m3733&_trkparms=aid%3D222007%26algo%3DSIM.MBE%26ao%3D1%26asc%3D20160928092414%26meid%3D8895273c6adf40eb971d6827e7772389%26pid%3D100415%26rk%3D1%26rkt%3D4%26mehot%3Dpp%26b%3D1%26sd%3D273807730304%26itm%3D283278025579&ul_noapp=true
Logged

David Laver, Lewisham.
simonandjuliet
Permanent resident
**
Posts: 2538



« Reply #12 on: 09 November, 2020, 12:06:45 PM »

After a very lengthy delay - not all CV19 related - The Appia is off to have some much needed metalwork done.

"Dave the Brave" has just arrived from the UK and is working alongside Dog, so he has agreed to do the basic welding before Dog does the paint

Hopefully more photos soon


* IMG_4965.jpeg (225.53 KB, 960x1280 - viewed 204 times.)
Logged

AmilcarCGS, ApriliaCabrio,S2Aprilia,Ardea c'cino,S4 Ardea, Appia c'cino, Appia f'cino,B20 s4,4 R4 Sinpar, R4 Rodeo, 65 Moke, 2xR60 Tractor, 2xToselli 78, Moto Guzzi Ercole, Disco 3, Mini ALL4 JCW, Moto Guzzi Cardellino, Fulvia GT, RE Himalayan, Ypsilon
tzf60
Senior Member
*****
Posts: 152



« Reply #13 on: 09 November, 2020, 12:46:53 PM »

Hi Simon  Smiley
Will she be ready to earn her keep in time for next season's harvest??
 
I see you don't need the tractor to negotiate the village!
 
Best regards,
Tim F
Logged

1939 Series 1 Aprilia undergoing very slow restoration.....
 
Previous Lancias: 1979 Beta Sedan 2000, 1982 Delta 1500, 1988 Delta 1.3, 1992 Dedra 1.8ie
GerardJPC
Megaposter
*
Posts: 313



« Reply #14 on: 09 November, 2020, 06:11:58 PM »

I love this thread!
Logged

1962 Appia Berlina
1973 2000 HF Coupe
1978 Beta 1600 Coupe

1973 Fiat 124 Sport Coupe 1800
1981 Lotus Eclat S2
1982 Moto Guzzi V50 Monza
1982 Yamaha YB 100
1983 Land Rover SIII 88
2005 Alfa Romeo 156 Crosswagon Q4
2009 Jaguar XK 5.0
Pages: [1] 2 3   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.084 seconds with 21 queries.