Lancia Motor Club Forum Banner
24 April, 2019, 04:50:46 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: fulvia 1600 hf  (Read 159 times)
0 Members and 1 Guest are viewing this topic.
Roy Bod Bolderson
Member
*
Offline Offline

Posts: 7


« on: 28 February, 2019, 08:26:36 AM »

Hi just wondered if any one has a picture of were the oil temp sender goes on the engine also if any one has one for sale or were i can get one please .Also cylinder head touque settings for 1600 hf manual says 3.2kgm for standard bolts and 2.3 kgm for fiat bolts how can i tell the differance ? cheers Bod
Logged
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3463



« Reply #1 on: 28 February, 2019, 08:35:42 AM »

If bolts have FIAT on them (most likely) it is the lower figure. Best to replace anyway with 110mm long 12.9 M8 Cap bolts ant reuse the thick washers and use the higher figure.

The temp sender position depends on what oil filter mounting you have as slightly different if you have the standard one to the one the couples an oil radiator. Anyway it si on the oil filter mounting at the back.
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines