Lancia Motor Club Forum Banner
04 June, 2020, 11:27:48 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: integrale spacers  (Read 511 times)
0 Members and 1 Guest are viewing this topic.
Kevinlincs
Rebel Poster
*
Posts: 664


« on: 21 February, 2019, 09:49:16 PM »

Hi guys.
Does anyone know, should the thin wheel spacers that also hold the disc in place be on both axles? Sure mine only had them on the rear axle, no sign of them on the fronts, wouldn't they be on both axles?
They're only thin, about 5mm thick..
4 stud car, by the way!
Logged
CasualSaint
Member

Posts: 2


« Reply #1 on: 24 February, 2019, 09:30:08 AM »

Hi,
The spacers on the rear stub axles don't keep the discs in place, but they are there to allow flush fitting of the rear wheels. If you look closely you'll have a 5mm step on the rear stub axles, the spacer takes that up. There are no spacers fitted to the front. Coincidentally it is this step that caused me no end of grief when i came to fit a set of NTM wheels with the incorrect offset, in the end i had to resort to a bespoke pair of hubcentric spacers.
Hope this helps.
 
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.045 seconds with 21 queries.