Lancia Motor Club Forum Banner
28 March, 2024, 12:02:34 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1] 2   Go Down
  Print  
Author Topic: Early Aprilia wheels.  (Read 8003 times)
0 Members and 1 Guest are viewing this topic.
Tony Stephens
Senior Member
*****
Posts: 186


« on: 08 January, 2019, 05:04:37 PM »

I have always rather liked the early Aprilia wheels.
Correct me if I'm wrong, but it seems to me there should be plenty in garages and sheds, unusable because the rolled rims have rusted through.
If possible, I would like to look at a project to recondition a batch with newly-made rolled rims as original.
I have an original drawing: does anyone have a rusted wheel to lend me to get this idea going?
« Last Edit: 08 January, 2019, 05:07:48 PM by Tony Stephens » Logged
GG
Megaposter
*
Posts: 552



WWW
« Reply #1 on: 08 January, 2019, 10:13:23 PM »

Cavalitto has remade Aurelia wheels. Maybe talk to him?
Logged

B20 s.2, Appia C10, Flavia 2000
Raahauge
Senior Member
*****
Posts: 127


« Reply #2 on: 08 January, 2019, 10:48:25 PM »

Tony.
I have a wheel you can have, I could get Ian Ferguson to take it to TOPO if that suits.
Mike
Logged
Tony Stephens
Senior Member
*****
Posts: 186


« Reply #3 on: 09 January, 2019, 09:09:21 AM »

That would be perfect, Mike.
I am there on 17th for a Committee meeting.
Thank you very much.
Tony
Logged
Tony Stephens
Senior Member
*****
Posts: 186


« Reply #4 on: 09 January, 2019, 09:14:41 AM »

Geoff, I am a repairer and a skinflint when possible. Mostly these wheels will have rusted long before the centres have reached end of life.
Logged
will
Senior Member
*****
Posts: 103



« Reply #5 on: 09 January, 2019, 11:16:46 AM »

I have a couple of B20 wheels with the rolled rim which have rusted through
can they be repaired ?

Cavattlito sells the 5/6th series wheels without the rolled rim  https://www.oldlanciaspares.com/470-lancia-AURELIAA-sparepart-wheel-for-5---6-serie.php
 
« Last Edit: 09 January, 2019, 11:21:18 AM by will » Logged

Aurelia B20 4th Series Appia 2nd Series  Kappa Coupe 3.0 24v V6
williamcorke
Rebel Poster
*
Posts: 681


B10


« Reply #6 on: 09 January, 2019, 02:00:28 PM »

Cavalitto has remade Aurelia wheels. Maybe talk to him?


But not the rolled-rim ones, unless I missed that.

I am definitely (with Will How, and probably others) in the market for re-rolled-rimming of early Aurelia wheels.
Logged

'37 Aprilia
'50 B10
'53 B20
'68 Flavia Vignale
'55 Giulietta Sprint
S1 Land Rover
the.cern
Permanent resident
**
Posts: 1494


« Reply #7 on: 10 January, 2019, 08:16:06 AM »

...... and could we add Augusta into the mix please!!

                                      Andy
Logged
Tony Stephens
Senior Member
*****
Posts: 186


« Reply #8 on: 17 January, 2019, 07:57:17 AM »

What I find out will be helpful for other models. You need a drawing first.
Logged
Tony Stephens
Senior Member
*****
Posts: 186


« Reply #9 on: 17 January, 2019, 08:01:51 AM »

In the mean time, the sample wheel has turned out not to be Aprilia, although what it is, is a mystery ( detail differences in width, offset etc).
So, many thanks indeed to Mike Raahauge for helping, but I am still on the search!
« Last Edit: 20 January, 2019, 12:02:28 PM by Tony Stephens » Logged
JohnMillham
Permanent resident
**
Posts: 1045



« Reply #10 on: 17 January, 2019, 11:25:45 AM »

Are they Augusta, perhaps?
Logged
brian
Megaposter
*
Posts: 279


« Reply #11 on: 18 January, 2019, 09:43:02 AM »

Agree rolled rims a problem. It would be interesting to know the costs involved but so few B10s about it may be for me that the run would be so small as to be uneconomic.
In the good old days when I did a few Historic Alpine Rallies in the B10, I used 2 sets of Flaminia wheels and had the rims cut off and replaced with Rover 3.5L 15” rims so I could use modern rubber. Interestingly I needed fewer balance weights than on my standard wheels. My original standard B10 wheels appear (use the word with caution!) ok at the moment but I still have the rally wheels + tyres stacked in a corner of the garage.
My Augusta had awful rims and I found a place (from memory) in Salisbury which re-spoked the wheels keeping the centres but putting on standard 16” rims for which it is very easy to find tyres.  They said that the 400 rim was difficult to source. Again balancing used less added weights than the original. I calculated the difference in circumference and it was only a few % and I suspect unnoticeable when driving.
Logged

Brian Hands


1922 Hands Tourer
1934 Augusta standard saloon
1938 Aprilia S1 saloon
1953 Aurelia B10
1965 Flavia Sport
williamcorke
Rebel Poster
*
Posts: 681


B10


« Reply #12 on: 18 January, 2019, 10:50:45 AM »

Few B10 (and 21, 22, 50) but wouldn't the same rims apply to B20 series 1-4 (early 4 at least), which would widen the potential market considerably.

Below is a possibly useful drawing (credit to GG's Lanciaaurelia.info website). Did S1 Aurelia berlinas and coupes have different width wheels?



* Screen Shot 2018-01-03 at 13.57.32.png (208.62 KB, 800x292 - viewed 474 times.)
Logged

'37 Aprilia
'50 B10
'53 B20
'68 Flavia Vignale
'55 Giulietta Sprint
S1 Land Rover
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #13 on: 18 January, 2019, 03:48:56 PM »

B12 also is 165 x 400 Michelin Pilot type as is B24 etc
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
ben
Lapsed
Megaposter
*
Posts: 456


« Reply #14 on: 18 January, 2019, 06:58:17 PM »

Hi Tony
          I have several S1 Aprilia wheels with rusted out rolled rims but good centres that I could contribute.

         However I am not in need of any for myself at present.

                   Ben 
Logged
Pages: [1] 2   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.033 seconds with 21 queries.