Lancia Motor Club Forum Banner
16 December, 2018, 04:48:13 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Steering wheel hub/ring  (Read 272 times)
0 Members and 1 Guest are viewing this topic.
Bainesy
Member

Offline Offline

Posts: 2



« on: 14 November, 2018, 09:01:47 PM »

Hi everyone, my first post as I'm a new member, having just purchased a Series 3 Fulvia.  It is fitted with a Ferrero steering wheel...but the aluminium ring is missing under the countersunk screw heads (see pics. top two show how it should be, bottom is mine).  Does anyone know where I might be able to get hold of one?  Thanks Keven



* 48.JPG (333.52 KB, 800x600 - viewed 178 times.)

* 53.JPG (271.21 KB, 800x589 - viewed 180 times.)

* 15462_991086e01b1fdsc_0219.jpg (756.76 KB, 3872x2592 - viewed 13 times.)
« Last Edit: 14 November, 2018, 09:03:20 PM by Bainesy » Logged
stanley sweet
Permanent resident
**
Offline Offline

Posts: 1078



WWW
« Reply #1 on: 16 November, 2018, 11:45:47 AM »

I have an identical Ferrero fitted to mine. Can't help you with the part but I believe there's a lot of interchageability between other Italian makes like Momo and Nardi etc. I can't swear to which fits which but if you do a bit of Googling on hole centres (PCD?) you may be able to pick a ring up from a different maker.
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
stanley sweet
Permanent resident
**
Offline Offline

Posts: 1078



WWW
« Reply #2 on: 16 November, 2018, 08:51:38 PM »

......alternatively you could replace the countersunk bolts with cap bolts (might be the wrong description). The type that has a deeper cylindrical head with the recessed hex. They would sit flat against the wheel and alloy ones would look good.
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
Jaydub
Senior Member
*****
Offline Offline

Posts: 131


« Reply #3 on: 17 November, 2018, 11:46:36 AM »

Either get a machine shop to make one, easy for a skilled machinist. A cheaper way is to use stainless steel Allen cap button head screws. They have a domed head. Don`t use aluminium screws they aren`t strong enough.
Logged

1600 HF. S2.
stanley sweet
Permanent resident
**
Offline Offline

Posts: 1078



WWW
« Reply #4 on: 17 November, 2018, 02:27:51 PM »

You're right. I shouldn't have said 'alloy'.  I just had an image of a silver screw in my head.
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
Bainesy
Member

Offline Offline

Posts: 2



« Reply #5 on: 20 November, 2018, 06:31:17 PM »

Thanks for the ideas...much appreciated. 
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines