Lancia Motor Club Forum Banner
16 October, 2018, 12:35:08 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Augusta engine side plates  (Read 117 times)
0 Members and 1 Guest are viewing this topic.
brian
Senior Member
*****
Offline Offline

Posts: 157


« on: 10 August, 2018, 03:26:53 PM »

Now this is an anorak-y post!
Tidying up the bits of Gussie engine that was damaged (see previous) I needed a replacement LH side engine plate as mine has now a slight buckle and I thought a straight one would be easier than flattening the original. I have several and the best is different in that an aluminium(?) sheet is held inside by 12 brass rivets with a ?gasket between it and the side plate. It is the only one in my collection of 7 with this addition.
This made me look in the parts book and there is only one part no. for the side plates and they are different left to right.
So again questions:
1. Why only one part no. for what is obviously 2 different parts - unless they were originally both the same!!? And if the same - which form was it?
2. What is the reason for the (presumed) modification of my plate?

Brian
Logged

Brian Hands


1922 Hands Tourer
1934 Augusta standard saloon
1938 Aprilia S1 saloon
1953 Aurelia B10
1965 Flavia Sport
Kari
Member
***
Offline Offline

Posts: 26


« Reply #1 on: 10 August, 2018, 05:09:53 PM »

Brian,

Indeed, the 2 plates of my spare engine are the same. Installed, on both sides the recess is positioned at the lower side for at the LHS allow for the starter motor and on the RHS a small extension covers the rear banjo bolt for the rear main bearing oil supply.

When I had that conrod failure many years ago, there was a hole in the plate. I did cut out the affected part and a mate welded a new flat piece in. Maybe that would work for you too.

I cannot think of a reason to modify a side plate.

I hope that helps

Regards  Karl


* 000_0234.jpg (668.3 KB, 2304x1536 - viewed 10 times.)

* 000_0247.jpg (844.76 KB, 2304x1536 - viewed 9 times.)
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines