Lancia Motor Club Forum Banner
16 December, 2018, 04:46:14 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Delta bonnet and 1600 GT i.e. Radiator grill required  (Read 175 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3353



« on: 19 July, 2018, 04:47:59 AM »

Our 1600 GTi.e. daily driver has been in the wars after we were hit in the front by a Citroen Berligo in France who rounded a blind bend at speed in the wet.

The bonnet and grill took the impact as did the radiator but nothing else structural (i.e. The bumper and valance are fine).

I have fitted a new rad so the car can be used but I need a good bonnet and mor importantly a front grill. The 1600i.e. Seems to be a face lift model and earlier Mk1 grills do not fit. The later grill is identified with 2 plastic protrusions on the back the "plug" into some clips . Earlier grills have 3 plactic feet at the bottom.

Please private message me if you have a spare grill/ good bonnet.

Thanks
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines