Lancia Motor Club Forum Banner
28 March, 2024, 10:21:12 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: 1 ... 6 7 8 9 10 [11] 12 13 14 15 16 17   Go Down
  Print  
Author Topic: E55 LBR the parallel project  (Read 79634 times)
0 Members and 1 Guest are viewing this topic.
fay66
Permanent resident
**
Posts: 6189



« Reply #150 on: 06 April, 2021, 11:05:38 AM »

The beast is bolted to the bench so it won't fall over...managed to do 2 rear and one front bearing on the Suzuki but really need a slide hammer to get the front hub off as the outer race stays onto the hub when you finally get it off. The race is now stuck on the hub and Suzuki list a special puller but Youtube came to the rescue. As the race is no longer needed because the new bearings come as a complete unit the race is no lnger needed so a kind man on Youtube showed a method of grinding an X into the race and bashing out a V shaped bit that releases the grip of the race on the hub and with a bit more bashing it was off with no damage to the hub. So we powered up the compressor and gave the 3.5" saw thing a try out and 10 minutes later it was off Amazing!
Thing is the gearchange on the Y10 is next to unuseable so I need to put some new bushes in (using the new toy) so do the Fiat Panda ones fit? vaguely remember Ed China changing some on a Panda...
Clarkey
While all the bushes will probably need replacing, the most wear is in a bracket/swivel tree bearings and shaft that bolts to the back of the gearbox, not sure if these still a available but I think I still have the exploded drawing and the part numbers of the bits involved,from when I did my Y10 Gtie about 15 years ago!
Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
frankxhv773t
Permanent resident
**
Posts: 2204



« Reply #151 on: 06 April, 2021, 12:15:05 PM »

It might be worth checking on E-per to see if Cinquecento bits will do.
Logged
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #152 on: 06 April, 2021, 09:22:58 PM »

Found some of these for sale somewhere last year, I'll try and find where.
On my Y10 LX they were OK so I didn't bother buying, but it was the complete bracket with the new link installed.
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #153 on: 06 April, 2021, 09:38:03 PM »

This is the main piece that bolts to the back of the gearbox, if there's a lot of wear in the bushes it will ruin the accuracy of the change.

https://www.ebay.co.uk/itm/Fiat-Panda-One-Y10-Support-Drive-Gears-91385328-7691320-7652856-VEMA-13229/133708120948?hash=item1f21a00374:g:E~EAAOSwIFBfl70V
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
fay66
Permanent resident
**
Posts: 6189



« Reply #154 on: 07 April, 2021, 07:26:20 AM »

This is the main piece that bolts to the back of the gearbox, if there's a lot of wear in the bushes it will ruin the accuracy of the change.

https://www.ebay.co.uk/itm/Fiat-Panda-One-Y10-Support-Drive-Gears-91385328-7691320-7652856-VEMA-13229/133708120948?hash=item1f21a00374:g:E~EAAOSwIFBfl70V
That's the one!
Brian
8227 Cool
Logged

Own 1966 Fulvia 2C Berlina since 1997, back on road 11-1999.Known as "Fay"
2006 Renault Megane 1 5 Dci Sports Tourer
Dedra Technical Adviser
lancianut666
Permanent resident
**
Posts: 1651


Slow but rough


« Reply #155 on: 07 April, 2021, 08:25:33 AM »

Overwhelmed by all the help and support thanks guys
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #156 on: 07 April, 2021, 10:17:48 PM »

Also I now recall there being two types, there was another one that looked nigh on identical but on inspection the bolt holes were in different places, both in-line from memory rather than offset as per this one, so worth checking..
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Kevinlincs
Permanent resident
**
Posts: 1531


« Reply #157 on: 07 April, 2021, 10:33:36 PM »

Slightly similar.....

https://www.ebay.co.uk/itm/13220-Support-Drive-Complete-Box-Gears-Fiat-Panda-750-900-1000-1100-86-97/373100839257?epid=5025028886&hash=item56de8b0159:g:zNUAAOSwd4pe~JaF
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
lancianut666
Permanent resident
**
Posts: 1651


Slow but rough


« Reply #158 on: 08 April, 2021, 08:30:24 AM »

Thanks again for all the help It seems I will have to check out what is fitted and take it from there.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1651


Slow but rough


« Reply #159 on: 08 April, 2021, 03:03:33 PM »

Hi all
Had a quick scrummage under the car at the gearchange and low and behold the gizmo bolted to the gearbox was really loose...so out with a 13mm socket and all tightened up thing was the change still seemed remarkably vague as before Huh? so will have to get the car up in the air a bit so I can get underneath properly and have a good rive about with the linkage. Another point is from my limited view of the bracket fixing holes they look to be in line and not diagonal as in the link Kevin put up...Was hoping to give the little beast a few laps of the carpark so will try and get the linkage sorted before that.
Clarkey
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
lancianut666
Permanent resident
**
Posts: 1651


Slow but rough


« Reply #160 on: 10 April, 2021, 10:54:27 AM »

Whilst trawling ebay for linkage parts came across this https://www.ebay.co.uk/itm/Set-Hebelwirkung-Austausch-Fiat-Panda-Lancia-Y10-Fur-7687667-4259848/183730938203
It seems to be a kit to replace the bushes in the gear linkage but what are the roller bearings for?
Puzzled of Redcar


* s-l1600.jpg (154.71 KB, 1600x1600 - viewed 162 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
frankxhv773t
Permanent resident
**
Posts: 2204



« Reply #161 on: 10 April, 2021, 07:23:09 PM »

From the exploded diagram in the listing I think they are for the front end of the rods from the gear lever to the bell cranks on the gear box. That diagram says 1988 to 1992 but the application check comes up positive for a 1985 Fire.
Logged
Duncan23
Member
****
Posts: 93



« Reply #162 on: 13 April, 2021, 09:50:42 AM »

That looks useful.  Wonder if it would fit a 1993 (pre-facelift y10). Out of stock anyway. Sad
Logged
frankxhv773t
Permanent resident
**
Posts: 2204



« Reply #163 on: 13 April, 2021, 07:59:43 PM »

I've been doing some digging in my spares, dismantling and cleaning up my spare gear shift mechanism. The set pictured has the three nylon cups that press into the ends of the fore and aft rods to push them on to the ball joints, plus the parts for the pivot sleeve on the gear lever. So it's all the bits before the bell crank that Kevin found and does not contain the bushes for the rods from the bell crank to the two levers coming out of the gearbox.

I checked my spare bell cranks. One is seized solid and the other has about 1mm of side play in it. The nut on the end is welded in place, hence the complete unit Kevin found, so it can't be dismantled and re-bushed.
Logged
lancianut666
Permanent resident
**
Posts: 1651


Slow but rough


« Reply #164 on: 16 April, 2021, 05:11:30 PM »

Got the little beast jacked up enough to get under and dismantled the linkage a bit and removed the swivel bracket thing and it is well worn as are some of the bushes and securing pins. Quick blast round Ebay found a UK supplier for the bracket and bushes so will be here next week. I will probably take all the linkage off and clean it up and a lick of paint before it all goes back on. We can then have a few laps of the car park!!!
Clarkey


* DSCN5218.JPG (75.54 KB, 640x480 - viewed 392 times.)

* DSCN5220.JPG (75.66 KB, 640x480 - viewed 323 times.)

* DSCN5221.JPG (74.26 KB, 640x480 - viewed 413 times.)
Logged

Fulvia Coupe S2 Flavia Coupe 1967 1.8 Kugelfischer Prisma 1.6 carb Y10 Fila Y10 Touring Dedra 1.8 Dedra 2.0 Turbo Appia S1
Pages: 1 ... 6 7 8 9 10 [11] 12 13 14 15 16 17   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.072 seconds with 21 queries.