Lancia Motor Club Forum Banner
02 November, 2024, 11:31:35 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: How likely is a Timing Chain to skip?  (Read 5111 times)
0 Members and 1 Guest are viewing this topic.
Angle Grinder
Megaposter
*
Posts: 427



WWW
« on: 29 May, 2018, 05:35:45 PM »

I've read that a Flavia timing chain can skip with incredible ease if a car ever rolls backwards whilst in gear.

As it happens, I inadvertently left the car in 4th gear and didn't realise this when I gently rolled the car (very slowly) a few inches this morning. I'm now feeling a bit paranoid.

My car did have a timing chain tensioner modification done to "provide a positive stop" (according to the invoice from Richard Thorne), so I'm wondering just how violent does the reverse force on the chain need to be to cause a jump?

Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8
brian
Megaposter
*
Posts: 289


« Reply #1 on: 29 May, 2018, 07:48:56 PM »

I have heard this "story" (?) before but in the 40 yrs I have been in and around Flavias and 2000s I have never actually heard of a case first hand. It is always "it might/could/possibly". I am sure in all my 2000 days I did roll back in gear at some point(s) but timing was not a problem I met - lots of others!
I think I would be happy with what the guys who did the timing chain said.
However I do understand your anxiety and it would not be a big job just to check the timing - so no definitive answer!!
Logged

Brian Hands


1922 Hands Tourer
1934 Augusta standard saloon
1938 Aprilia S1 saloon
1953 Aurelia B10
1965 Flavia Sport
stanley sweet
Lapsed
Permanent resident
**
Posts: 1149



WWW
« Reply #2 on: 29 May, 2018, 10:30:47 PM »

My brother-in-law did his apprenticeship with Rob Walker when they were Lancia dealers in the Fulvia era and did a bit of work on mine years later. He said they were great cars but warned me never to be lazy and stop it rolling backwards by lifting the clutch as it could make the chains slip a tooth.  He worked on all sorts of exotic engines and really knew his stuff so I have never done this. I don't know how likely it is in reality but would rather just avoid the the risk anyway.
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
chriswgawne
Permanent resident
**
Posts: 2081



« Reply #3 on: 30 May, 2018, 08:07:11 AM »

Somewhat embarrassingly at the time, I had exactly this happen to a friend of mines Fulvia 1600HF in the early 80's that I was working on.
We were giving his car an oil change, a new set of points and plugs etc and I pushed the car backwards in gear to check the points gap.
Nothing untoward happened but when time cane to start the car, firstly it didn't start easily then when it was running it was evident that one or more pistons were touching the valves! A quick shutdown and repositioning the timing chain sorted it out without any damage but the timing chain itself was quite stretched and was changed shortly after as was the tensioner which was badly worn.
Since then, on any car I always only pull the car forward to check the points gap.
Chris
Logged

Chris Gawne
Mobile: 07778 216552
Angle Grinder
Megaposter
*
Posts: 427



WWW
« Reply #4 on: 31 May, 2018, 07:07:09 PM »

So started her up and all was fine. Phew! Smiley
Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8
Brian Long
Senior Member
*****
Posts: 119

Aurelia B12, Flavia 2000 Coupe


« Reply #5 on: 04 June, 2018, 10:09:18 AM »

I owned an 815 Flavia sedan back in the late '60s which had done about 200,000 miles. Its timing chain slipped when it misfired on starting-up because it was extremely worn.
By my reckoning, the shoulder on the chain tensioner should 'bottom' against the crankcase, when there is no oil pressure, and still constrain the chain if the latter is not too worn. Admittedly, I haven't tested this theory on a dismantled engine as yet.
Nevertheless, I have fitted a threaded-rod and locknut stop on all of the five Flavias that I have owned over the last forty years.
A simple modification for some peace of mind!
Brian
Logged
bobhenry999
Megaposter
*
Posts: 350


« Reply #6 on: 06 June, 2018, 09:41:38 PM »

Brian,

Like you I have owned Flavia/2000`s for a number of years (35 years and counting !) but have never had this problem myself. How would one go about doing the threaded rod and lock nut stop modification the you have suggested ?

Regards,

Bob
Logged

Flavia 815 Vignale
Flavia 819 Milleotto
Flavia 815 Coupe Inezione
2000HF x2
2000 Coupe
2000 Sedan x3
Current 815 Coupe Variante 1005
Kevinlincs
Permanent resident
**
Posts: 1609


« Reply #7 on: 01 July, 2018, 08:23:27 PM »

Really interesting thread, never occurred to me before that it could happen but logical when you think about it if the tensioner doesn't have any means of stopping full retraction which would cause a slack enough chain for it to skip...
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Brian Long
Senior Member
*****
Posts: 119

Aurelia B12, Flavia 2000 Coupe


« Reply #8 on: 02 July, 2018, 05:33:20 AM »

The modification is quite simple.
Remove the brass hexagon plug on the block which contains the tensioner spring. Drill and tap a thread into the plug e.g. 1/4".
Cut a piece of threaded rod long enough to reach down to the inside of the tensioner plus enough to protrude through the hex and to allow a locknut to be fitted on the outside. Hacksaw a screwdriver slot across the end of the rod.
Reinstall the plug and run the rod down until it bottoms on the tensioner. Back it off a turn or two and lock in place.
Cheers.
Brian
Logged
Kevinlincs
Permanent resident
**
Posts: 1609


« Reply #9 on: 03 July, 2018, 10:25:44 PM »

The modification is quite simple.
Remove the brass hexagon plug on the block which contains the tensioner spring. Drill and tap a thread into the plug e.g. 1/4".
Cut a piece of threaded rod long enough to reach down to the inside of the tensioner plus enough to protrude through the hex and to allow a locknut to be fitted on the outside. Hacksaw a screwdriver slot across the end of the rod.
Reinstall the plug and run the rod down until it bottoms on the tensioner. Back it off a turn or two and lock in place.
Cheers.
Brian

A modification I'll be sure to do when the time comes, thanks for the info.
 
Logged

Flavia 815 coupe
Dedra turbo
Delta integrale
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.046 seconds with 21 queries.