Lancia Motor Club Forum Banner
25 February, 2020, 04:47:08 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
Author Topic: Fulvia water pumps, new and rebuilt  (Read 346 times)
0 Members and 1 Guest are viewing this topic.
Permanent resident
Offline Offline

Posts: 1435

« on: 29 May, 2018, 09:35:57 AM »

I have way too many Fulvia water pumps both new and rebuilt so I would ideally like to sell a few.
Firstly I have a brand new unused pattern pump which uses cap head screws ( so at a later date the seal can be changed) coded PA216 and this is available for 95 + 3.95 p&p 2nd class signed for.
I have another pump which was fully rebuilt and tested by the guys in S Africa a couple of years ago with new seals, bearing etc and this is 65 + P&P. This pump is unused since rebuild.
And I have another fully rebuilt pump with new internals for 55 + p&p which also hasn't been used since rebuild.

Chris Gawne
Mobile: 07778 216552
Pages: [1]   Go Up
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines