12 October, 2024, 01:06:42 PM
Welcome,
Guest
. Please
login
or
register
.
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
News
:
Need to contact the Forum Administrator? e-mail
forum.admin@lanciamc.co.uk
- Copy deadline for Viva Lancia is 12th of each month. - For Events e-mail
events@lanciamc.co.uk
- To Join the club go to
http://www.lanciamc.co.uk/join.htm
Home
Help
Search
Calendar
Register
Lancia Motor Club
>
Model Technical and Interest
>
Fulvia
>
Fulvia Sport 1.3s S2 bonnet not latching
Pages: [
1
]
Go Down
« previous
next »
Print
Author
Topic: Fulvia Sport 1.3s S2 bonnet not latching (Read 5706 times)
0 Members and 1 Guest are viewing this topic.
kevbo
Lapsed
Member
Posts: 74
Fulvia Sport 1.3s S2 bonnet not latching
«
on:
02 April, 2018, 04:19:14 PM »
Not sure if anyone can advise, but after trying to improve my bonnet alignment it's refusing to close properly. I managed to get it latched closed by removing the air box seal and slamming the bonnet, but now after trying further adjustment of the catch on the bonnet I think I've made it worse!
I noticed the catch dowel is quite worn and also the latch mechanism is very stiff. There's also a crossed spring arrangement in front of the latch which pops the bonnet upwards when the latch is released. I noticed this spring arrangement isn't shown in the parts book, do other S2 Sport owners have this arrangement?
Any help appreciated.
IMG_2125.JPG
(845.04 KB, 2048x1536 - viewed 488 times.)
IMG_2123.JPG
(970.47 KB, 2048x1536 - viewed 474 times.)
Logged
lancialulu
Press Officer
Permanent resident
Posts: 5021
Re: Fulvia Sport 1.3s S2 bonnet not latching
«
Reply #1 on:
03 April, 2018, 08:05:07 AM »
Dont think the springs are standard.
Logged
Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21. 12v
kevbo
Lapsed
Member
Posts: 74
Re: Fulvia Sport 1.3s S2 bonnet not latching
«
Reply #2 on:
03 April, 2018, 06:19:54 PM »
Thanks for that Tim. The spring certainly works well to pop the bonnet upwards when the latch is released. However, I took the whole mech off and now not entirely sure I've put the spring back as it was. Also, the bonnet pin only just makes contact with the latch and does look worn. So maybe a combination of things are stopping the latch from working correctly now. On occasions the latch has fired but the bonnet pin hasn't located.
I'll think have to go back to square one and start over!
Logged
davidwheeler
Permanent resident
Posts: 1479
Re: Fulvia Sport 1.3s S2 bonnet not latching
«
Reply #3 on:
20 April, 2018, 09:00:27 AM »
Mine certainly has the springs and looks just like yours. It is a matter of adjusting the position of the lock mechanism until the bonnet closes - you will notice it is possible to move it around a bit. It is a fiddle but I have got mine working - you may also need to bend the prong or adjust its position with washers.
Logged
David Wheeler. Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
kevbo
Lapsed
Member
Posts: 74
Re: Fulvia Sport 1.3s S2 bonnet not latching
«
Reply #4 on:
20 April, 2018, 07:38:06 PM »
Thanks David. I'm having a lot of trouble sorting this. Can you let me know how the latch and spring are assembled together? The whole arrangement includes two little top hat shaped steel bushes and I'm not sure where these go. The catch has two largish holes, do the top hat part of the bush insert into the holes in the catch from the engine bay side of the catch or do they face the other way?
Any help much appreciated.
Logged
davidwheeler
Permanent resident
Posts: 1479
Re: Fulvia Sport 1.3s S2 bonnet not latching
«
Reply #5 on:
26 April, 2018, 06:23:59 PM »
There is a top hat sitting behind the spring. I am not sure without dismantling but I am pretty sure it fits into the housing behind. On the other hand, if the narrower bit fits the spring that is where it goes!
IMG_0530.JPG
(1403.29 KB, 2473x1637 - viewed 460 times.)
Logged
David Wheeler. Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
kevbo
Lapsed
Member
Posts: 74
Re: Fulvia Sport 1.3s S2 bonnet not latching
«
Reply #6 on:
26 April, 2018, 09:29:50 PM »
Thanks for posting the photo David. The spring does fit nicely over the bush which is how I've assembled it. I'm trying to source another latch and get a new bonnet pin made up. The latch design I think may be unique to the Sport but it might be possible to modify one from an Alfa 33, looks similar anyway.
Logged
Pages: [
1
]
Go Up
Print
« previous
next »
Jump to:
Please select a destination:
-----------------------------
General
-----------------------------
=> About the LMC Forum
=> General Chat
=> Press/Media: Lancias mentioned, seen or wanted!
=> Competition Information
=> Events 2024
=> Events 2025
=> Local Events
=> LMC Legends
=> Links
-----------------------------
Model Technical and Interest
-----------------------------
=> Pre-Lambda
=> Lambda
=> DiLambda
=> Artena and Astura
=> Augusta
=> Aprilia, Ardennes and Ardea
=> Aurelia
=> Appia
=> Flaminia
=> Flavia
=> Fulvia
=> Stratos
=> Beta and Montecarlo
=> Gamma
=> Delta and Prisma
=> Dedra, Thema and Delta (2nd series)
=> Ypsilon, Musa and Y10
=> Kappa
=> Thesis
=> Delta (2008-)
=> Commercial Vehicles
=> Other Lancia Models
-----------------------------
Buy, Sell and Search
-----------------------------
=> Members' cars for sale
=> Lancia vehicles for sale
=> Lancia vehicles required
=> Spares for sale
=> Spares required
-----------------------------
Events Archive
-----------------------------
=> Events 2011
=> Events 2012
=> Events 2013
=> Events 2014
=> Events 2015
=> Events 2016
=> Events 2017
=> Events 2018
=> Events 2019
=> Events 2020
=> Events 2021
=> Events 2022
=> Events 2023
Loading...