Lancia Motor Club Forum Banner
28 February, 2020, 11:02:45 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Aprilia steering columm  (Read 692 times)
0 Members and 1 Guest are viewing this topic.
Tony Stephens
Senior Member
*****
Offline Offline

Posts: 135


« on: 20 March, 2018, 02:50:38 PM »

Anybody got a drawing of an Aprilia steering column or wheel?
I need to identify the splines for the steering wheel boss, to make another boss.
I think the Aurelia used the same fitting.
Logged
Sliding Pillar
Permanent resident
**
Offline Offline

Posts: 1538



« Reply #1 on: 20 March, 2018, 06:46:27 PM »

I have a spare steering wheel that fits an Aprilia with the fine splines, is it of interest?
It is 15" diameter. Wheel now sold.


* Aprilia wheel (5).JPG (668.9 KB, 1475x1368 - viewed 87 times.)

* Aprilia wheel (2).JPG (685.12 KB, 1499x1368 - viewed 87 times.)

* Aprilia wheel (3).JPG (509.88 KB, 1591x1178 - viewed 83 times.)

* Aprilia wheel (7).JPG (691.68 KB, 1510x1329 - viewed 87 times.)
« Last Edit: 21 March, 2018, 12:31:56 PM by Sliding Pillar » Logged

1955 Aurelia
1961 Lamborghini
Tony Stephens
Senior Member
*****
Offline Offline

Posts: 135


« Reply #2 on: 20 March, 2018, 08:06:14 PM »

No, thanks very much, Ade: I am fitting a Brooklands steering wheel, for no reason other than that the car had one when I owned it in the 1970s. I have the wheel and a blank boss, which I need to machine to suit. The splines are the bit I can't do at home, although I can foresee machining the horn button mechanism being a challenge.
Pity the car had all the special bits removed while it was not in my ownership: the Spitfire rear view mirror on the door looked like a very expensive mountain to climb until I got lucky on eBay!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines