Double Banjo Coupling

Angle Grinder

Megaposter

Posts: 427

Double Banjo Coupling

« on: 19 March, 2018, 10:40:02 AM »

This Spring I intend to replace the Servo unit on my Flavia with a modern dual circuit remote servo. I have already bought the servo unit, but space is at a bit of a premium so I am looking for a double banjo coupling to keep the overall length of the "plumbing" as short as possible, rather than adding extra length by using using 2 single banjo couplings in tandem.

MY problem is that the only double banjo fitments that I can find are for connecting brake hoses and not for connecting copper brake pipes with 3/8 UNF flare nuts.

Has anyone got any suggestions for a supplier of said part?


	Logged

Current Cars: 1994 2.0 VIS Thema Station Wagon, 1967 Flavia 1.8 PF Coupe.

Previous cars:
1983 Prisma 1600
1991 Thema 16v i.e. SE
1988 Thema 8v Turbo
1992 Thema 16v i.e.
1983 Gamma Coupe (manual)
1993 Thema VIS
1994 Thema VIS LE
1990 Thema 2.8

ColinMarr

Permanent resident

Posts: 1660

Re: Double Banjo Coupling

« Reply #1 on: 19 March, 2018, 10:50:36 AM »

I suggest you try Think Automotive - https://www.thinkauto.com/ . I found them very helpful years ago when they were based at Isleworth. They had an amazing range of metric and UNF fittings.


	Logged

Neil

Permanent resident

Posts: 1316

Re: Double Banjo Coupling

« Reply #2 on: 19 March, 2018, 12:15:28 PM »

They have recently moved to a new location in Ashford (Surrey)

Think Automotive Ltd
Thames House
Ashford Road
Ashford
TW15 1XB

+44 208 568 1172


	Logged

Neil
386

1973 Fulvia S2 1.3

Pages: [1] Go Up

« previous next »

	Author	Topic: Double Banjo Coupling (Read 2678 times)
0 Members and 1 Guest are viewing this topic.