Lancia Motor Club Forum Banner
17 November, 2018, 07:47:28 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Fulvia Sport 1.3S 2nd Series Bonnet alignment  (Read 324 times)
0 Members and 1 Guest are viewing this topic.
kevbo
Member
****
Offline Offline

Posts: 74


« on: 15 February, 2018, 02:57:16 PM »

My bonnet is a little tight up against the offside wing when closed.  Is adjustment achieved by loosing the six bolts that fix the bonnet to the two hinges at the front of the bonnet or can adjustment be done at the point where the hinges pivot?

Any help gratefully received.
Logged
davidwheeler
Permanent resident
**
Offline Offline

Posts: 1015



« Reply #1 on: 19 February, 2018, 02:04:53 PM »

The former.
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
kevbo
Member
****
Offline Offline

Posts: 74


« Reply #2 on: 19 February, 2018, 07:50:40 PM »

Thanks for that David.  I did have a go at adjustment as described but ended up with the bonnet not closing properly.  However after taking the latching mech and spring out for a clean & lubrication it's closing ok now!
Logged
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines