Lancia Motor Club Forum Banner
17 October, 2018, 02:09:22 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Series 2 rear droop  (Read 392 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Offline Offline

Posts: 3308



« on: 31 January, 2018, 11:04:23 AM »

Series 2 Aurelia Droop limits:
While replacing the inner drive shaft boots on my B12 I noticed that the drive shafts bind when the rear suspension was on full droop.
On this car and other Series 2 Aurelias the droop is adjustable via the rear shock-absorber lower mounting. On my car which is quite low mileage example these had not been touched since the car left the factory and were set on maximum droop.
It only took c 5mm adjustment for the driveshafts to rotate freely. This will put less strain on the pot and outer UJs when the car is driven spiritedly over humps and bumps.
Logged

Its not the winning but taking part! or is it taking apart?
1955 Aurelia B12
1967 Flavia Vignale iniezione
1967 Fulvia HFR
1972 1600 HF
1972 1600 Fulvia Sport
1978 Transformer HF3000 Strato's replica
1979 2500 Gamma Coupe
1988 Delta 1.6GTi.e.
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2018 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines