Lancia Motor Club Forum Banner
08 October, 2024, 02:20:24 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Unusual addition to inlet manifold  (Read 5445 times)
0 Members and 1 Guest are viewing this topic.
stanley sweet
Lapsed
Permanent resident
**
Posts: 1149



WWW
« on: 15 December, 2017, 11:19:58 AM »

Hope it's OK to use this photo - found it in an ad for a Fulvia. Can anybody explain the addition of the rubber tube indicated on the inlet manifold? I've never seen this modification fitted to any other Fulvia. So it's either doing something very clever and we should all have one or it's doing nothing at all. By the way, what are the bolts for in that position on Fulvias? Are they for the fitting of a manometer?


* Fulvia inlet.jpg (478.24 KB, 1180x860 - viewed 388 times.)
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
lancialulu
Press Officer
Permanent resident
*****
Posts: 5020



« Reply #1 on: 15 December, 2017, 11:31:09 AM »

Hope it's OK to use this photo - found it in an ad for a Fulvia. Can anybody explain the addition of the rubber tube indicated on the inlet manifold? I've never seen this modification fitted to any other Fulvia. So it's either doing something very clever and we should all have one or it's doing nothing at all. By the way, what are the bolts for in that position on Fulvias? Are they for the fitting of a manometer?
"crude" balance ports that have been adapted  to take manometer tubing and when finished "closed off" with a tube which marginally shares out the 2nd and third venturi - why???
only between 2 and 3 venturi. 1 and 4 butterflys may be not synced as such. Best to use some method to find the average of 1&2 and 3&4. I use a cheap 10mm bore plastic pipe and listen to the hiss at tick over....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
stanley sweet
Lapsed
Permanent resident
**
Posts: 1149



WWW
« Reply #2 on: 15 December, 2017, 01:29:46 PM »

The other strange thing is the addition of that long spring from the throttle spindle to something that appeared to be attached to the top of the radiator. Not sure if it's supposed to be some 'secondary return spring' for motorsport. I never needed one when I was sprinting etc because Fulvia's have enough return springs built in as it is.
Logged

1971 Fulvia 1.3S 'Leggera'  1999 Lancia Lybra 1.9JTD LX SW
Jaydub
Megaposter
*
Posts: 346


« Reply #3 on: 15 December, 2017, 08:05:53 PM »

Tim, it only needs a take off on 2& 3 inlet ports to balance both carbs, because if you synchronise those 2 ports, 1 & 4 will automatically be the same as the butterflies are on a common spindle on each carb. when you listen for the hissing it will change if you alter the balance screw between the carbs. Adjusting the mixture screws can change the hiss slightly also. Obviously you need even compressions, valve clearances, no air leaks on the inlet manifold,etc. on all cylinders to achieve a good setup.
Logged

1600 HF. S2.
lancialulu
Press Officer
Permanent resident
*****
Posts: 5020



« Reply #4 on: 15 December, 2017, 09:40:42 PM »

Tim, it only needs a take off on 2& 3 inlet ports to balance both carbs, because if you synchronise those 2 ports, 1 & 4 will automatically be the same as the butterflies are on a common spindle on each carb. when you listen for the hissing it will change if you alter the balance screw between the carbs. Adjusting the mixture screws can change the hiss slightly also. Obviously you need even compressions, valve clearances, no air leaks on the inlet manifold,etc. on all cylinders to achieve a good setup.
sorry John you missed the point.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
carcrank
Lapsed
Member

Posts: 4



WWW
« Reply #5 on: 16 December, 2017, 05:37:49 AM »

I assume it's just an easy way of plugging two nipples that have been put there. The bore would be too small to act as a balance tube I would think.

Cheers

mark
Logged
Jaydub
Megaposter
*
Posts: 346


« Reply #6 on: 16 December, 2017, 10:57:00 AM »

Apologies Tim if I misunderstood. What point?
Logged

1600 HF. S2.
lancialulu
Press Officer
Permanent resident
*****
Posts: 5020



« Reply #7 on: 16 December, 2017, 02:22:51 PM »

Apologies Tim if I misunderstood. What point?
Sent you a PM....
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
rogerelias
Rebel Poster
*
Posts: 955


MY 1600HF IN HEARTBEAT GARAGE


« Reply #8 on: 16 December, 2017, 04:58:09 PM »

I remember years ago when I rallied a Fulvia  on night events in the Welsh Championship under 1300cc class, The local scrutineer who I never got on with, told me it could not run, as I did not have enough return springs on the throttles. This he did in front of people wondering what the car was. I argued that it had 3 springs, and only needed 2! He said his decision was final. At which point I pointed out that he was moving the chokes!!!  and then showed him the spring on each carb, and the the one where the cable was. Point made, 1 nil to me!
Logged

FULVIA 1600HF LUSSO
1958 VELOCETTE MAC
Triumph Bonneville t120v 1972
1968 MGC ROADSTER
1958 Series 2 Appia berlina
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.063 seconds with 21 queries.