Lancia Motor Club Forum Banner
28 March, 2024, 03:14:04 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk, for Database Administrator e-mail database.admin@lanciamc.co.uk      -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Aurelia water pump question  (Read 2740 times)
0 Members and 1 Guest are viewing this topic.
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« on: 26 November, 2017, 04:33:57 PM »

In process of rebuilding the water pump on my Aurelia B12 (2266cc engine).

Does anyone know if the bronze impeller shaft bearing should receive grease?

I ask as there is a grease way down to the phosphor bronze bearing but the bearing has no corresponding hole to let the grease in.

The water pump housing the fan bearings is greased in normal maintenance terms and this grease goes to the greaseway to the impeller shaft bearing.

Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Brian Long
Senior Member
*****
Posts: 111

Aurelia B12, Flavia 2000 Coupe


« Reply #1 on: 06 December, 2017, 10:20:31 AM »

as I recall, the grease nipple only serves to lubricate the two bearings supporting the fan.
The seal in the pump is effected by the 'O' ring and water-lubricated faces adjacent to the impeller (TAV 23, #2, 27 and 28).
Logged
lancialulu
Press Officer
Permanent resident
*****
Posts: 4902



« Reply #2 on: 06 December, 2017, 11:40:32 AM »

I have subsequently found that the phosphor bronze bush has an annular groove to permit grease from the main housing to the bush. Mine was clogged with rock hard soap (old grease) but when cleared worked well in greasing. I have heard from a well known Aurelia man that use of sealed bearings in the fan housing is a good upgrade but as I had bought new open bearings.
Logged

Its not the winning but taking part! or is it taking apart?
Lancias:
1955 Aurelia B12
1967 Fulvia 1.3HFR
1972 Fulvia 1600HF
1972 Fulvia Sport 1600
1983 HPE VX
1988 Delta 1.6GTie
1998 Zeta 21.  12v
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.074 seconds with 21 queries.