Lancia Motor Club Forum Banner
31 October, 2024, 11:20:19 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Need to contact the Forum Administrator? e-mail forum.admin@lanciamc.co.uk     -      Copy deadline for Viva Lancia is 12th of each month.      -      For Events e-mail events@lanciamc.co.uk      -      To Join the club go to http://www.lanciamc.co.uk/join.htm
 
   Home   Help Search Calendar Register  
Pages: [1]   Go Down
  Print  
Author Topic: Absence of Timing marks on S1  (Read 1160 times)
0 Members and 1 Guest are viewing this topic.
OldSparky
Member
**
Posts: 18


« on: 29 September, 2023, 07:46:04 PM »

An earlier post ( in 2008)  referenced no timing marks on a S1 Fulvia.  I seem to have the same problem. Although TDC is possible any thoughts on setting timing ( ideally with strobe) Do I have to count teeth ( not sure on how many all the way round) and then calculate where to paint dot on and even this will have an error.

Clues welcome.

And  I thought ownership would be straightforward!



Logged
Charles Frodsham
Megaposter
*
Posts: 247



« Reply #1 on: 29 September, 2023, 08:06:33 PM »

There should be a TDC mark, but not an Ignition mark……is that what you have? If so you can time from TDC….10 degrees.
Logged
davidwheeler
Permanent resident
**
Posts: 1479



« Reply #2 on: 30 September, 2023, 01:30:30 PM »

Agree, most strobes have a facility for setting the timing of the spark relative to tdc.
Logged

David Wheeler.  Lambdas, Aprilia, Fulvia Sport.(formerly Appia and Thema as well).
nistri
Megaposter
*
Posts: 560


« Reply #3 on: 02 October, 2023, 07:09:41 AM »

On S1 1.3 engine timing is set 2 teeth before TDC which is indicated by a flywheel mark (often difficult to see because of old dirt).
Logged

Andrea Nistri

Ardea S2
Appia S2
Fulvia GTE
Fulvia Sport 1.3 S
Fulvia Montecarlo
Fulvia Coupe 1.3 S
Pages: [1]   Go Up
  Print  
 
Jump to:  

Contact the Forum Administrator

LMC Forum copyright © 2007 - 2021 Lancia Motor Club Ltd

Powered by SMF 1.1.20 | SMF © 2006-2011, Simple Machines
Page created in 0.055 seconds with 21 queries.