Lancia Motor Club

Model Technical and Interest => Aurelia => Topic started by: williamcorke on 23 October, 2017, 05:20:11 PM



Title: Rear suspension tools for B10
Post by: williamcorke on 23 October, 2017, 05:20:11 PM
Apologies if this is a 'repeat topic'...

I need to dismantle one of the rear hubs on my B10 to replace a bad-feeling bearing (not had it on the road, but you can feel its pain).

Does anyone on the forum have a set (pair?) that I can borrow. Or should I go to Omicron?

Those of long memory might intuit that I'm making some progress with this very slow rebuild and they'd be right. I might even resurrect the forum thread.


Title: Re: Rear suspension tools for B10
Post by: Parisien on 23 October, 2017, 06:13:31 PM
Hi Will, please see posts in the link below. Assuming rear hub bearing same all though Aurelia range, part no #48353 RIV 9387C

http://www.lancia.myzen.co.uk/forum/index.php?topic=5254.120

I had enquired on the above thread about club tools but Brian said the club didn't have any, so drawings were supplied and we made our own. If stuck I can mail them to you.

P


Title: Re: Rear suspension tools for B10
Post by: williamcorke on 24 October, 2017, 08:20:30 AM
Thanks Frank,
I think I might get a local engineering shop to make a pair of tools up, as you did. Having read your experience, I'll make sure they start with 'hard' raw materials.
Cheers,
W


Title: Re: Rear suspension tools for B10
Post by: Parisien on 24 October, 2017, 08:39:45 AM
Thanks Frank,
I think I might get a local engineering shop to make a pair of tools up, as you did. Having read your experience, I'll make sure they start with 'hard' raw materials.
Cheers,
W

No problem, let me know if you need drawings forwarded, and please do kickstart your B10 restoration thread again, always of interest!

P