Lancia Motor Club

Model Technical and Interest => Delta and Prisma => Topic started by: Kevinlincs on 22 October, 2017, 08:06:19 PM

Title: front anti roll bar
Post by: Kevinlincs on 22 October, 2017, 08:06:19 PM

Hi.
Can anyone confirm that the ends of the front anti roll bar should be straight? Mine are bent, I'm thinking that whilst it was pushed around without the forward tie bars on it twisted the ends..

Title: Re: front anti roll bar
Post by: Kevinlincs on 24 October, 2017, 10:39:01 PM

Also have a leftover front bar from one of the HF turbo's I had recently, it also looks bent...so maybe that's how they are?

Title: Re: front anti roll bar
Post by: Kevinlincs on 27 October, 2017, 08:37:32 PM

By the looks of this one, mine is OK  ;)

https://www.ebay.co.uk/itm/Lancia-Delta-Hf-Integrale-16v-Anti-Roll-Bar/263278907276?hash=item3d4ca54f8c:g:ztUAAOSwYxBZ71a8

Title: Re: front anti roll bar
Post by: A1.6HPE on 02 November, 2017, 08:51:02 PM

Hello Kevin,

I have not logged in here for a while...
Yes that is how they are - Have seen many when changing the rubber shroud :-)

Leo

Title: Re: front anti roll bar
Post by: Kevinlincs on 03 November, 2017, 06:39:33 PM

Hi Leo.
Thanks very much for that, really good to know I'm not using a bent ARB!
I can carry on in confidence now  ;D