|
Title: Starter Motor removal in a Kuglefisher flavia 1800 Post by: lancialulu on 03 August, 2016, 03:14:50 PM Am a bit stuck!!!
Want to remove the starter motor from my Inezione Flavia but cannot see how without removing the Kuglefischer unit. Chinese jigsaw puzzle. Also the orange oil filter housing may be in the way but does this come off? Tim Title: Re: Starter Motor removal in a Kuglefisher flavia 1800 Post by: lancialulu on 06 August, 2016, 04:49:42 PM Update
Not stuck anymore. There is a zero tolerance clearance between the injection pump and the top of the engine with the starter motor angled away from the pump. It fouls at the rear end of the motor after 1/4 in gap between it and the gearbox housing. Judicial use of 3 pry bar freed it eventually. Bizarre that my spare motor just slide past and into the bell housing. |