Lancia Motor Club

Buy, Sell and Search => Spares required => Topic started by: Rosco on 11 May, 2016, 12:30:34 PM



Title: Fulvia bits
Post by: Rosco on 11 May, 2016, 12:30:34 PM
Hello again all,

After a few more Fulvia bits and wondering if anyone can help?

I require:

Carburettor support bracket (as mine snapped)
Carburettor drip tray

Also, the various gearbox rubber guards (and a steering one too) as mine are all split (I know these are all available new, but again if anyone has any decent ones kicking around??).

Ta,

Ross.


Title: Re: Fulvia bits
Post by: Richard Fridd on 18 June, 2016, 03:19:13 PM
From my autojumble @20 inc UK post. Tray has a split where one of the brackets is welded on, which could be soldered.


Title: Re: Fulvia bits
Post by: fay66 on 18 June, 2016, 11:35:13 PM
From my autojumble @20 inc UK post. Tray has a split where one of the brackets is welded on, which could be soldered.

Carburettor support bracket as well, Bargain :D

Brian
8227 8)


Title: Re: Fulvia bits
Post by: Rosco on 19 June, 2016, 10:45:23 AM
Thanks Richard, but I'd already ordered both and taken delivery at the beginning of the week.

Not too bad, at a tad under 40.

Cheers,

Ross.


Title: Re: Fulvia bits
Post by: lancialulu on 19 June, 2016, 03:26:41 PM
The support needs to have a rubber "grommet" and tube spacer for the bottom mount just in case you had not seen these on your car.....


Title: Re: Fulvia bits
Post by: Rosco on 19 June, 2016, 10:18:41 PM
Do you have a pic, Tim?