Lancia Motor Club

Buy, Sell and Search => Spares required => Topic started by: Andrew1950 on 24 December, 2015, 02:46:57 PM



Title: S1 starter motor possible problem solved (I hope!) Advice please
Post by: Andrew1950 on 24 December, 2015, 02:46:57 PM
Just took off and checked my starter and think the machinist put on too many spacers for it to engage with the flywheel.

In the 2nd pic I have pushed the pinon gear with a screwdriver out as far as it can go before hitting the spacer.

If I am correct, can I simply remove the 3 spacers (nearest the body) and leave the bigger one?