|
Title: Fulvia Zagato S2 Heater Motor Post by: MaxC on 04 October, 2014, 10:52:04 AM Hi, Hope someone can help.............
I have a noisy heater motor, the cause of which I've identified as the motor being loose in it's housing, which appears to be part of, or accessed via, the large air intake under the bonnet. The problem is that I can't just see how to either get at the motor, or remove the air intake. Any help / suggestions gratefully received! Cheers Max Title: Re: Fulvia Zagato S2 Heater Motor Post by: Richard Fridd on 04 October, 2014, 11:39:21 AM Isn't the motor inside the cabin, along with the heater matrix? If so, not all that easy I suppose
Title: Re: Fulvia Zagato S2 Heater Motor Post by: Zagato on 05 October, 2014, 07:52:29 PM From memory I removed the large metal air duct under the bonnet ... I think there are two blanking grommets on the side nearest the engine which allow access to the bolys holding this ducting ... Once these are removed you can then remove the motor from the housing ... all done from the engine bay
Omicron advised me that there are two different makes ... one is fairly rare ... the other extremely rare ... I think Omicron may be able to supply a refurbished unit but you will need to call them Regards Richard |