|
Title: Fulvia parts Post by: ColinMarr on 05 June, 2014, 06:31:04 PM In addition to the 1300 engine (with parts) and the gearboxes, which I have listed separately, I also want to part with numerous other Fulvia spares. There are too many to list and price separately, so here is a long list. I would welcome enquiries by email first please.
Thanks, Colin Fulvia parts all used except where marked NOS or just new: Fuel tank, probably S1 Aluminium bonnet Sport S1 Rear hatch with glass Sport S2, rusted out round hinge mountings Radiator for Sport S1 Carburettors pair of Solex 42s on a good rubber mount Headlamp units Sport, 1 pair concave, 1pair convex. Restorable? Rear light units (2) and covers for Sport S1 Front indicator clear glass covers for Sport S1 Side indicator amber light unit (1) for Sport Water tap with handle brass S1 Thermostat in its housing, not badly corroded Brake servo S2 Brake master cylinders (2) stripped and clean bodies OK Brake callipers Girling S2 front and rear Brake pads S2 Front Bendix NOS Speedos and other instruments S1 and S2 Oil temp gauge (1600HF) and sender Piston rings for 1600HF Perfect Circle Boxed set (new) 82.00 + 0.60 Wheel bearing NOS SKF 102 X 38 Front grille for Sport 2 bent broken units, repairable with skill! Instrument dash-panel padded vinyl cover Sport, tatty Pedal rubbers pair NOS Pedal (accelerator) rubber rollers pair NOS Gear lever rubber gaiter Exhaust hanger rubber (new) Rocker cover gasket set (new) Jack original with ratchet handle and bag Wheel bolts S2 set of 16 Title: Re: Fulvia parts Post by: dave baker on 22 October, 2014, 08:06:03 PM Hello Colin. I haven΄t looked at the forum for months but I still need a working S1 clock and a correct Jack with ratchet handle if they are still available. Regards
Dave Title: Re: Fulvia parts Post by: ColinMarr on 27 October, 2014, 11:58:50 AM Thanks Dave. As on our off-forum emails - the jack is now spoken for. Carry on enjoying a Fulvia in Portugal - sounds good to me.
Colin Title: Re: Fulvia parts - S2 Speedo Post by: Middle_Pond on 11 March, 2015, 03:23:37 PM Hello Colin, I'm new member. Is the S2 speedo still available?
Title: Re: Fulvia parts Post by: ColinMarr on 12 March, 2015, 09:18:40 AM Hello Stuart, Pleased to welcome a new member. I still have the instruments - I'll email direct.
Colin Title: Re: Fulvia parts Post by: RRomanis on 28 March, 2015, 07:32:50 AM Hi Colin
I don't suppose you still have the NOS wheel bearing? Thanks, Robert |