|
Title: Fulvia 1600 sport Post by: Chas1 on 08 March, 2014, 11:58:49 PM I am looking for new nuts and bolts to connect half shafts to the gearbox, does anyone know where I can source these?
I need eight new or good used. Thanks Title: Re: Fulvia 1600 sport Post by: phil-m on 09 March, 2014, 01:59:46 PM You should be able to source these from any decent machine shop/stockists. Always use new when replacing them.
Title: Re: Fulvia 1600 sport Post by: Chas1 on 10 March, 2014, 08:55:49 AM Many thanks for the advice
Charles Title: Re: Fulvia 1600 sport Post by: Peter Gerrish on 15 May, 2014, 09:57:59 AM Inner drive shafts on 1600 Sport should be Allen Screws with strange nonlocking keeper plates in two pieces (i.E. each plate held by three bolts) No nuts or plain washers involved! Cheers. Peter Gerrish
|