Lancia Motor Club

Buy, Sell and Search => Spares required => Topic started by: stuwilson128 on 07 November, 2013, 07:46:35 PM



Title: Fulvia parts urgently required
Post by: stuwilson128 on 07 November, 2013, 07:46:35 PM
Before I go to Omicron, I thought I would see if anybody has a few parts which have been requested by my restorer for my Fulvia S2 coupe.  He currently needs the following items to progress the work on my car:

Subframe mounts x6.
Mountings for the rear suspension - he has specifically asked for spring shackles and bushes.
Hub nuts - front and rear (four slot type).

If you have any of these parts, please message me with what you have and prices (including postage).

Thank you!

Stuart


Title: Re: Fulvia parts urgently required
Post by: phil-m on 07 November, 2013, 07:54:33 PM
Hi Stu,

 I have plenty of mountings- The rubber donuts and aluminium platforms? I have the rear hub nuts as well, at least 1 of the 4 slot type and plenty of the more robust multi slot type. I am having a clear out tomorrow so I will see what else I turn up. Let me know if any of the above are of interest.


Title: Re: Fulvia parts urgently required
Post by: stuwilson128 on 07 November, 2013, 08:04:23 PM
Hi Stu,

 I have plenty of mountings- The rubber donuts and aluminium platforms? I have the rear hub nuts as well, at least 1 of the 4 slot type and plenty of the more robust multi slot type. I am having a clear out tomorrow so I will see what else I turn up. Let me know if any of the above are of interest.

Yes, they will all be of interest!  If the multi-slot hub nuts are more robust and are the same size / threads, then I think it will probably be better to go for this type rather than the 4-slot.  The car currently has the 4-slot nuts which is why they were requested.


Title: Re: Fulvia parts urgently required
Post by: phil-m on 07 November, 2013, 08:07:51 PM
OK, I will PM you some more details


Title: Re: Fulvia parts urgently required
Post by: peterbaker on 07 November, 2013, 11:14:24 PM
Can we please stop taking cheap shots at Omicron.


Title: Re: Fulvia parts urgently required
Post by: stuwilson128 on 08 November, 2013, 05:29:43 PM
Can we please stop taking cheap shots at Omicron.

Peter,

My comment was in no way cheap shot at Omicron.  I have bought items from them in the past and have always had good service from them.  However, as I am doing my restoration on a shoestring budget, I would rather find items which are friendly to my budget.  I would therefore ask that unless your comments are constructive, please do not make comments like this on any of my posts.