|
Title: Engine suspension question Post by: MaciekPeda on 12 June, 2013, 05:47:36 PM Hi everyone again !
I work already at engine suspension leaf springs. What is a correct thickness for shims between metal layers ? Are those shims with equal thickness ? See attached picture Thank yours in advance for any answer. Regards from now sunny Poland Title: Re: Engine suspension question Post by: simonandjuliet on 17 June, 2013, 08:00:31 PM Hi
My engine mountings are different, but I very happy to measure them if you think it will help. Mine is a 1947 , 2nd series car Title: Re: Engine suspension question Post by: MaciekPeda on 19 June, 2013, 07:31:06 PM My engine mountings are different, but I very happy to measure them if you think it will help. Hi ! If you can measured, i will be very thankful :)) BTW, there was two main engine mountings systems in second series Aprilias, see pictures below. I have first of them. Kindly regards from tropical Poland Title: Re: Engine suspension question Post by: simonandjuliet on 19 June, 2013, 07:33:41 PM Will try and do it tomorrow
Title: Re: Engine suspension question Post by: simonandjuliet on 12 July, 2013, 07:53:01 PM sorry for the delay , been diverted by real, paid work .....
The spacers are about 4.5mm and the total depth ( 3 springs and 2 spacers) comes to 24.1 mm Hope this helps Title: Re: Engine suspension question Post by: MaciekPeda on 13 July, 2013, 08:55:53 PM Thank you very much !
Regards from Poland Maciek |