|
Title: fLAMINIA dISTRIBUTOR CAP Post by: lancialulu on 21 September, 2011, 07:04:04 AM These are like rocking horse poo or very expensive.
I have heard that a mid 90's Nissan V6 works (with its own rotor arm) with a few minor mods. Any input to this please??? Tim BTW these can be bought for pounds Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: Richard Fridd on 21 September, 2011, 07:27:10 AM hi Tim,sounds a good piece of info!what mods are required as i assume someone has tried this already?also is there one cap/arm in particular recommended?best regards richard
Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: GG on 21 September, 2011, 10:06:27 AM FWIW, I think these were remade by Cavalitto in Italy. While not cheap, its good when people continue to remake important Lancia parts, no?
Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: lanciab20 on 30 January, 2013, 06:22:58 PM Just bought a PF Flaminia so now interested in Flaminia parts. Did any more info emerge on the use of Nissan V6 Distributor cap?
Regards Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: Richard Fridd on 30 January, 2013, 06:33:18 PM Hi Stuart, nothing more that I know of. I hope you are enjoying having a PF, and look forward to seeing a pic. Richard
Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: fay66 on 31 January, 2013, 02:10:14 AM Just bought a PF Flaminia so now interested in Flaminia parts. Did any more info emerge on the use of Nissan V6 Distributor cap? Stuart,Regards Congratulations on you purchase, I take it she will be on show at Bedford Old Boys? Brian 8227 8) Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: St Volumex on 31 January, 2013, 08:37:08 AM I have some new Magnetti Marelli Flavia / Fulvia distributor caps - are the Flaminia's the same?
Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: lancialulu on 31 January, 2013, 09:03:13 AM nope! v6 v4!
Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: St Volumex on 31 January, 2013, 10:59:18 AM Doh! I'd obviously not woken up properly then. :P
Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: frankxhv773t on 31 January, 2013, 01:55:00 PM V4?......Flat 4 (not that it makes a difference to the number of knobles on it).
Frank Title: Re: fLAMINIA dISTRIBUTOR CAP Post by: lancialulu on 31 January, 2013, 02:35:27 PM OK V6 v F4/V4 :)
|