|
Title: Keys WANTED Post by: zagatoman on 04 March, 2010, 08:32:21 PM Hi
Looking for keys for the boot of my two 1969 Lancia Fulvias. I have to keys at present, one is original Lancia, the other is aftermarket made by ILCO, code LN1. I would like to purchase 6 replacments. Hope you can help, Paul http://farm3.static.flickr.com/2200/4407234388_682555811c_b.jpg Title: Re: Keys WANTED Post by: lancialulu on 04 March, 2010, 09:39:09 PM you can get these blanks on ebay worldwide.
Tim Title: Re: Keys WANTED Post by: St Volumex on 05 March, 2010, 06:32:57 AM I see that Omicron also has Fulvia keys now.
Title: Re: Keys WANTED Post by: Neil on 05 March, 2010, 09:50:18 AM I had an extra key cut a few years ago, it a Silca blank ref GT12A is stamped on one side at a local shoe repairer/key cutter, if that helps.
Title: Re: Keys WANTED Post by: zagatoman on 05 March, 2010, 10:51:04 AM Hi all
Thanks for your help, all sorted now. Paul Title: Re: Keys WANTED Post by: Neil on 05 March, 2010, 11:17:08 AM £1 bargain! The GT12A is the door key on S2 Fulvias.
Title: Re: Keys WANTED Post by: Richard Fridd on 05 September, 2010, 02:29:00 PM £1 bargain! The GT12A is the door key on S2 Fulvias. i have just got a GT12A for s2 door locks which fits but the Timpson folk have sent a ' KL italy' SK20RP for the ignition which will not fit.advice very welcome as ever.best regards richardTitle: Re: Keys WANTED Post by: zagatoman on 05 September, 2010, 04:35:34 PM Hi Richard
I have got an uncut GT13A that fitted the ignition on my Fulvias is this what you are looking for? it’s not a Silca key. it’s made by JMA and marked GIOB-21. If you would like it just send my your address again. Also got a GT12A made by DL marked GT3 Paul Title: Re: Keys WANTED Post by: Richard Fridd on 06 September, 2010, 07:28:05 AM thanks Paul,have sent address in a PM
Title: Re: Keys WANTED Post by: zagatoman on 08 September, 2010, 07:49:50 PM Hi Richard
Do you want both keys? Uncut GT13A fitted the ignition on Fulvias, it’s not a Silca key. it’s made by JMA and marked GIOB-21. Uncut GT12A made by DL marked GT3 Will stick in the post tomorrow. Paul Title: Re: Keys WANTED Post by: Richard Fridd on 09 September, 2010, 03:07:26 AM hi Paul ,its the GT13A which i need i think.many thanks richard
Title: Re: Keys WANTED Post by: Richard Fridd on 13 September, 2010, 05:03:01 PM key received.many thanks Paul
Title: Re: Keys WANTED Post by: zagatoman on 13 September, 2010, 07:57:51 PM Your welcome. :)
Title: Re: Keys WANTED Post by: Richard Fridd on 23 September, 2010, 04:49:23 PM thanks for the blank Paul ,but the profile of the key received does not match my 'fiat arman y7691' black ignition key according to timpsons keycutter.so advice on identifying the correct blank would be most welcome.the door/boot key blank from timpson was more straightforward.or do i have an unusual barrel i wonder-seems unlikely.best regards richard
Title: Re: Keys WANTED Post by: zagatoman on 23 September, 2010, 07:55:59 PM Hi Richard, sorry you had no luck with the key.
What are the code numbers on the key you are after? A photo would be helpful. Paul Title: Re: Keys WANTED Post by: Richard Fridd on 24 September, 2010, 04:14:20 PM hi Paul,all i can see is fiat Y7691
Title: Re: Keys WANTED Post by: zagatoman on 24 September, 2010, 06:51:12 PM Hi Richard,
Any detail photos? Paul Title: Re: Keys WANTED Post by: Richard Fridd on 25 September, 2010, 03:29:30 PM many thanks for your efforts Paul.unfortunately i still have no digital camera
Title: Re: Keys WANTED Post by: Richard Fridd on 05 September, 2011, 05:54:23 PM the JMA key has now been cut and filed to match my original flaminia ignition switch [broken and repaired]key so has not gone to waste
Title: Re: Keys WANTED Post by: zagatoman on 10 September, 2011, 10:00:25 PM Pleased it was useful after all.
Good luck with everything. If you need any more keys give me a shout. Paul |