|
Title: LMC TIPS Post by: donw on 08 January, 2010, 05:54:37 PM Came accros this in a draw in the garage whilst looking for something else.
Will post other pages separately as too large. Don Title: Re: LMC TIPS Post by: donw on 08 January, 2010, 05:57:14 PM Back to the drawing board as file too large!!!!
Title: Re: LMC TIPS Post by: fay66 on 08 January, 2010, 07:21:57 PM Back to the drawing board as file too large!!!! Have you tried resizing Don, down to about 150 Kbs should do it.brian 8227 8) Title: Re: LMC TIPS Post by: sparehead3 on 08 January, 2010, 10:19:20 PM You realise chaps that we're all building an electronic archive on this Forum :) No bad thing .....
Title: Re: LMC TIPS Post by: donw on 09 January, 2010, 06:32:18 PM Having rescaned and broken it down I hope this will be the first pages! Inspite of failing the system thinks I have posted so trying a change to see if it will accept.
Don Title: Re: LMC TIPS Post by: donw on 09 January, 2010, 06:35:03 PM Well third time lucky after some valuable input from the technical expert in residence.
So here come the second set of pages. Title: Re: LMC TIPS Post by: donw on 09 January, 2010, 06:42:25 PM Its most annoying that when the system tells you the file is too big (even when its only 498kb) it wont let you re-post having resized the attachment!
Having backed right out it then lets you. Title: Re: LMC TIPS Post by: donw on 09 January, 2010, 06:43:44 PM Success!!!
And finally the back cover Don Title: Re: LMC TIPS Post by: fay66 on 09 January, 2010, 08:39:06 PM Thanks Don, Although I can now read the file, my attempts to copy and print failed ???
Brian 8227 8) Title: Re: LMC TIPS Post by: sparehead3 on 09 January, 2010, 10:02:17 PM Brian, try clicking on the file name rather than the image - you should then get the option to Save or Open it.
Title: Re: LMC TIPS Post by: fay66 on 09 January, 2010, 11:27:52 PM Thanks Steve,
Worked a treat, I knew I must be doing something wrong, DoH ::) Now printed my own booklet. Thanks Don. Brian 8227 8) Title: Re: LMC TIPS Post by: davidwheeler on 11 February, 2010, 04:41:38 PM Also demonstrates a problem with the forum, if you go back to page 3 you will see that I put this booklet through my OCR program and posted it! Not quite complete though as my booklet was a bit damaged. Perhaps we need to collate all the technical information in a special file to prevent needless duplication.
David |