Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: bill on 21 July, 2009, 05:49:18 PM



Title: passed
Post by: bill on 21 July, 2009, 05:49:18 PM
hi, what a relief,my car passed the MOT.still work to do (minor i hope) cannot wait until the end of the month to have it on the road. it has been quite a long haul, but worth it when I had my test certifcate in my hand.
I would just like to thank the forum members for all your help, advise and interest.
next question (joke)no doubt I will have more. one thing when I first stripped the carbs. I did not realise there were jets below the float chamber until I had the workshop manual. when i stripped the first carb. from the rad. the jets were all crusted up any ideas why? the jets in the second carb. were as new. these were the jets in botton of the carb.
well, one happy camper. thank you once more.
bill.


Title: Re: passed
Post by: ncundy on 21 July, 2009, 05:59:28 PM
Probaly just dirt from the fuel lines - was the fine filter there in the intake line (in the carb head)?

Glad you are over the first hurdle !


Title: Re: passed
Post by: Neil Lewis on 21 July, 2009, 10:57:38 PM
A small amount of water in the float chamber can cause havoc with jets since the fuel tends to float on top of it.  So maybe one carb was getting some water ingress through the choke mechamism which is open to atmosphere (hence the wooshing noise).

Neil


Title: Re: passed
Post by: fay66 on 22 July, 2009, 12:26:52 AM
A small amount of water in the float chamber can cause havoc with jets since the fuel tends to float on top of it.  So maybe one carb was getting some water ingress through the choke mechamism which is open to atmosphere (hence the wooshing noise).

Neil

JUust realised how much I miss the characteristic "Whooshers" now that I have Dellortos and an electric priming pump fitted.
Must admit I didn't realise that's the reason why they make that noise :D
Brian
8227 8)


Title: Re: passed
Post by: bill on 22 July, 2009, 04:39:59 PM
hi, I cleaned the fine filter on the inlet side of the petrol line, I also mixed some wynns carb. cleaner with the petrol and all seems well. I will know once I get the car on the road.

cheers.
bill.