Lancia Motor Club

Buy, Sell and Search => Spares for sale => Topic started by: chriswgawne on 30 March, 2022, 02:12:40 PM



Title: Aurelia Tecnomagnesio 15" magnesium alloy wheels
Post by: chriswgawne on 30 March, 2022, 02:12:40 PM
I am very short of space here in Sunningdale and so things have to go!
I have a set of surplus 4 Aurelia Tecnomagnesio 15" magnesium alloy wheels in excellent condition fitted with barely worn Michelin 185HR15 tyres.
These are genuine Tecnomagnesio magnesium alloy wheels, not the much heavier Heinebrand alloy wheels. The eagle eyed amongst you will notice that there are 2 types of wheel. The first mould which Tecnomagnesio used in the early 90's gave an offset which meant with some Aurelias, the bottom of the sliding pillar touched the wheel on vigorous cornering. So they modified the mould to give greater offset. But......this then gave a problem at the rear with some cars if heavily laden or lowered as the tyre touched the inside of the wheelarch.
Solution....2 x Mk 1 wheels at the rear and 2 x Mk 2 wheels at the front. I have this arrangement on my 4th series B20 in Italy for years and its perfect. These wheels have been occasionally used on my 3rd series race car and also on my standard 1st series B20 without any issues.
Any reasonable offer considered.
Chris


Title: Re: Aurelia Tecnomagnesio 15" magnesium alloy wheels
Post by: Richard Fridd on 30 March, 2022, 04:48:41 PM
Do these fit Flaminia Coupe, do you know Chris? Richard


Title: Re: Aurelia Tecnomagnesio 15" magnesium alloy wheels
Post by: chriswgawne on 30 March, 2022, 05:25:36 PM
Not sure Richard. They dont fit late B20s with twin leading shoe front brakes.
Chris