Lancia Motor Club

Model Technical and Interest => Flavia => Topic started by: msh2908 on 26 December, 2021, 11:42:17 AM



Title: Flavia Copue 2000 (1970) - 6 pin external wheel hub nut tool
Post by: msh2908 on 26 December, 2021, 11:42:17 AM

I hope that everyone has had a good Christmas?

having used an local engineers shop to get the inside bearing nut undone and changed the bearings i now need to ensure that I get the external 6 pin nut tightened correctly. I've asked the consortium, who do not have the right sized tool and and our friends in Norfolk, who say its out with another customer - so no joy!  So, I was wondering of anyone on this forum had the correct sized tool I could hire? The external size of the nut is 50mm.

Best wishes

Mark


Title: Re: Flavia Copue 2000 (1970) - 6 pin external wheel hub nut tool
Post by: lancialulu on 26 December, 2021, 11:43:56 AM

I hope that everyone has had a good Christmas?

having used an local engineers shop to get the inside bearing nut undone and changed the bearings i now need to ensure that I get the external 6 pin nut tightened correctly. I've asked the consortium, who do not have the right sized tool and and our friends in Norfolk, who say its out with another customer - so no joy!  So, I was wondering of anyone on this forum had the correct sized tool I could hire? The external size of the nut is 50mm.

Best wishes

Mark

Hi Mark   - did you know the club hires out tools such as these??

Email me tim248@aol.com


Title: Re: Flavia Copue 2000 (1970) - 6 pin external wheel hub nut tool
Post by: msh2908 on 26 December, 2021, 12:48:06 PM

I hope that everyone has had a good Christmas?

having used an local engineers shop to get the inside bearing nut undone and changed the bearings i now need to ensure that I get the external 6 pin nut tightened correctly. I've asked the consortium, who do not have the right sized tool and and our friends in Norfolk, who say its out with another customer - so no joy!  So, I was wondering of anyone on this forum had the correct sized tool I could hire? The external size of the nut is 50mm.

Best wishes

Mark

Hi Mark   - did you know the club hires out tools such as these??

Email me tim248@aol.com


Thanks for this Tim - who do I need to talk to?

Mark


Title: Re: Flavia Copue 2000 (1970) - 6 pin external wheel hub nut tool
Post by: Neil on 26 December, 2021, 01:45:06 PM
Ask Tim direct


Title: Re: Flavia Copue 2000 (1970) - 6 pin external wheel hub nut tool
Post by: GG on 26 December, 2021, 05:25:22 PM
You may be able buy this hub tool on Ital Ebay....


Title: Re: Flavia Copue 2000 (1970) - 6 pin external wheel hub nut tool
Post by: lancialulu on 26 December, 2021, 06:15:15 PM
email me direct

tim348@aol.com

Tim