Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: andyps on 06 October, 2021, 08:56:25 PM



Title: Gearbox breather
Post by: andyps on 06 October, 2021, 08:56:25 PM
Is there a breather on the gearbox at all? I wondered if the dipstick/filler cap worked on that basis but having looked closely can see that the hole is below the O-ring so doesn't vent outside. Mine is leaking slightly (not from the driveshaft seals) so I wondered if a breather is blocked but can't see one anywhere.


Title: Re: Gearbox breather
Post by: lancialulu on 06 October, 2021, 09:17:43 PM
There should be a c1mm hole just below the top.


Title: Re: Gearbox breather
Post by: andyps on 07 October, 2021, 09:16:06 PM
Thanks, I suspected there should be so I'll investigate and try to find it. Must be completely blocked on mine