Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: Justin McArdle on 29 June, 2021, 01:03:40 PM



Title: Fulvia accelerator roller bearings
Post by: Justin McArdle on 29 June, 2021, 01:03:40 PM
I need to change the two nylon wheels behind the accelerator pedal as they expand on hot days and the pedal sticks.
What size roller bearings are required as replacements.
Thanks


Title: Re: Fulvia accelerator roller bearings
Post by: D5177_55A on 29 June, 2021, 03:35:46 PM
626 bearings. 6mm wide; 19mm outer diameter. 6mm ‘hole’. Don’t forget to ‘hand-bend’ the channel back to shape as well.


https://www.bearing-king.co.uk/bearing/626-2rsh-skf-sealed-deep-groove-ball-bearing-6mm-bore/3569


Title: Re: Fulvia accelerator roller bearings
Post by: my69S1 on 29 June, 2021, 03:39:14 PM
Also these.  Same size.

https://www.bearing-king.co.uk/bearing/626-2z-skf-shielded-deep-groove-ball-bearing-6mm-bore/3570


Title: Re: Fulvia accelerator roller bearings
Post by: Justin McArdle on 29 June, 2021, 07:00:09 PM
Thanks everyone


Title: Re: Fulvia accelerator roller bearings
Post by: fay66 on 29 June, 2021, 07:46:17 PM
Thanks everyone

Justin you notice the difference!
Brian
8227 8)


Title: Re: Fulvia accelerator roller bearings
Post by: robupton on 06 July, 2021, 10:41:21 PM
Good timing! I was just looking at my accelerator pedal yesterday and wondering why it was flopping around. I thought something must be missing and I guess it must be those bearings!

A related question - at the  other end of the throttle cable my cable goes around the 'post' and is secured in a temporary looking way. How is the engine end of the cable supposed to attach?


Title: Re: Fulvia accelerator roller bearings
Post by: lancialulu on 08 July, 2021, 05:41:30 AM
Good timing! I was just looking at my accelerator pedal yesterday and wondering why it was flopping around. I thought something must be missing and I guess it must be those bearings!

A related question - at the  other end of the throttle cable my cable goes around the 'post' and is secured in a temporary looking way. How is the engine end of the cable supposed to attach?
Original equipment had a “rubber” bush. These ball bearings replace those.

On the question off throttle cable depends the the midel if car….