|
Title: S2 Sump/Oil Pan Post by: RDG496 on 06 May, 2021, 08:44:26 AM I may need to source a new sump, when we last changed the oil it seemed the current one had been welded at one point and the threads on the sump plug required pfte tape and some sealer.
It does not leak at all but I suspect at one point a replacement may be needed. Used is the best/only option ?? Are all Pans the same on the 1.3 whether S1 2 or 3 ? Title: Re: S2 Sump/Oil Pan Post by: Jai Sharma on 06 May, 2021, 06:08:06 PM I think, but am not sure, that all the sump pans will fit.
There were a few that were a bit deeper, so presumably hold a bit more oil, I think these were on the very last cars but am not sure. Title: Re: S2 Sump/Oil Pan Post by: RDG496 on 06 May, 2021, 07:24:24 PM Thanks for coming back, I shall trawl the net....I'll find clarification somewhere !
Title: Re: S2 Sump/Oil Pan Post by: Beckerman67 on 07 May, 2021, 07:05:58 AM New one here https://www.ricambilanciafulvia.it/en/spare-parts-lubrification-system-lancia-fulvia/489-coppa-olio-fulvia-13.html (https://www.ricambilanciafulvia.it/en/spare-parts-lubrification-system-lancia-fulvia/489-coppa-olio-fulvia-13.html)
Title: Re: S2 Sump/Oil Pan Post by: RDG496 on 07 May, 2021, 07:29:06 AM This is where I realise Fulvia ownership is not cheap
Eur 323 Also Front Wheel bearing, German Repro +140ish Similar Alfa parts GBP 135 and 24 I will source a used one I think, I can wait as its not leaking......yet ! Title: Re: S2 Sump/Oil Pan Post by: Jaydub on 07 May, 2021, 09:34:00 AM I would get the threaded hole welded up, drilled and rethreaded. Not too difficult if you know a good aluminium welder/machine shop.
Title: Re: S2 Sump/Oil Pan Post by: RDG496 on 07 May, 2021, 11:14:34 AM If I can find a used one at a decent price I will buy it, if not I'll find a local welder and go that route.
Either way the last resort will be paying GBP300+ that's for sure ! Title: Re: S2 Sump/Oil Pan Post by: Jay on 07 May, 2021, 12:12:00 PM They do come up on ebay quite regularly
Title: Re: S2 Sump/Oil Pan Post by: fay66 on 07 May, 2021, 12:33:49 PM This is where I realise Fulvia ownership is not cheap Front wheel bearings have been selling for over £100 for at least the last 12+ years unless you were very lucky, but what a bearing , they make great door stops.Eur 323 Also Front Wheel bearing, German Repro +140ish Similar Alfa parts GBP 135 and 24 I will source a used one I think, I can wait as its not leaking......yet ! Brian 8227 : 8) Title: Re: S2 Sump/Oil Pan Post by: Beckerman67 on 07 May, 2021, 06:27:37 PM https://www.ebay.co.uk/itm/274782211011?hash=item3ffa4bcbc3:g:67wAAOSw2XZgV0Jp
Title: Re: S2 Sump/Oil Pan Post by: davidwheeler on 10 May, 2021, 08:48:47 AM Helicoil.
Title: Re: S2 Sump/Oil Pan Post by: RDG496 on 11 May, 2021, 11:37:45 AM Bought that one on Ebay, will clean it up and install it...job done (I hope)!
|