Lancia Motor Club

General => General Chat => Topic started by: simonandjuliet on 16 October, 2020, 03:13:23 PM



Title: Torque settings - sliding pillar front axle
Post by: simonandjuliet on 16 October, 2020, 03:13:23 PM
Does anyone know the torque setting for front axle bolts on an Aprilia ?

Probably the same as other sliding pillar cars - they are lightly oiled, M10 fine (M10 X 1.00) with 17mm hex head. They are at least 8.8 and more likely 10.9 strength

I have tightened to what seems right, ie tight with a full-hex socket and 15" lever - by my reckoning about 70 ft/lb

Thanks