Lancia Motor Club

Model Technical and Interest => Augusta => Topic started by: Mikenoangelo on 07 September, 2020, 08:48:20 PM



Title: Augusta floor and transmssion mats
Post by: Mikenoangelo on 07 September, 2020, 08:48:20 PM
Has anyone experience of these?

https://www.lanciavintage.net/en/interior-and-upholstery/252-full-set-of-rubber-mats-lancia-augusta.html

I could do with a new transmisson cover as mine has become hard and cracked and wonder if the above are any good - the picture is not very convincing!

Mike


Title: Re: Augusta floor and transmssion mats
Post by: Sliding Pillar on 08 September, 2020, 06:37:37 AM
You can get them direct from the manufacturer, buying just the parts you require. They are made from the original moulds, but the floor mats are not quite as thick as the originals.
http://www.cicognaniguarnizioni.it/Lancia-132/augusta-132-f95


Title: Re: Augusta floor and transmssion mats
Post by: Kari on 08 September, 2020, 08:12:49 AM
I bought a whole set at Cicognani. It worked out well. It will need fairly thick felt or similar padding underneat. I have attached the part over the transmission tunnel permanently at the floor L/H and R/H

Regards  Karl


Title: Re: Augusta floor and transmssion mats
Post by: Mikenoangelo on 08 September, 2020, 08:30:54 AM
Thank you chaps - I'll go that route.

Mike