Lancia Motor Club

Buy, Sell and Search => Spares required => Topic started by: appiaman on 22 May, 2020, 07:32:56 AM



Title: Fulvia parts
Post by: appiaman on 22 May, 2020, 07:32:56 AM
Hi getting my 1600 Hf Fulvia back on the road
Missing the original coil bracket that's sits on top of the subframe.
Also looking for a complete bonnet catch as mine is so corroded that I can't get it loose spring missing


Title: Re: Fulvia parts
Post by: lancialulu on 22 May, 2020, 09:53:00 AM
I might have a coil bracket. Photo of the catch please? Maybe Simon Ingman has these too?

Tim



Title: Re: Fulvia parts
Post by: lancialulu on 22 May, 2020, 11:22:34 AM
Is this the bit of bonnet catch?

https://www.ebay.co.uk/itm/LANCIA-FULVIA-COUPE-BONNET-RELEASE-PEG-LEVER-ALL-GOOD/153454837441?hash=item23ba9efec1:g:JWQAAOSwMW5bcrfM



Title: Re: Fulvia parts
Post by: Richard Fridd on 22 May, 2020, 12:52:06 PM
I have this on my shelf, if of interest?


Title: Re: Fulvia parts
Post by: SanRemo78 on 22 May, 2020, 03:52:39 PM
A LOT of head scratching went into this one - check the image below, there's a bracket on the upper chassis rail of all Stratos, underneath the diagonal tube that goes up to the roof.

https://www.pinterest.co.uk/pin/416864509249262340/

Until very recently we didn't know what it was for. We do now, the first cars had the Fulvia bonnet latch as a securing mechanism! Very awkward to release though.

Only ever seen one picture of a car with it in place.

Guy


Title: Re: Fulvia parts
Post by: appiaman on 22 May, 2020, 05:29:06 PM
Thanks for all the replies so quick Tim
Has sorted me with a coil bracket and hopefully Richard can supply the lock
Fantastic
Regards
Christo