Lancia Motor Club

Model Technical and Interest => Fulvia => Topic started by: lancialulu on 30 March, 2020, 02:27:47 PM



Title: Fulvia 1.3 818303 engine for sale refreshed and ready to go
Post by: lancialulu on 30 March, 2020, 02:27:47 PM
I have just finished rebuilding a series 2 1.3 Fulvia, and it is now for sale.

The engine was stripped, cleaned, de- greased, de-coked, inspected and rebuilt with new gaskets, seals, big-end shell, main bearings, piston rings (a light hone of the bores to de-glaze), and inlet valve seals. The oil pump is within specification and has no scoring. The engine has been built with graphogen paste on all bearing surfaces and has turned over on the starter to pump oil around the engine

It is all standard with 303 pistons and series 2 (HF1600) camshafts. The head is stamped 302 but this is a 303 engine.

It is for sale for £1500 excluding the distributor and clutch (available separately). It is set up ready to go.

I know it is a difficult time to buy and sell, but PM if you are interested. I am happy to hold it till all this Covid nightmare blows over.