Lancia Motor Club

Buy, Sell and Search => Spares for sale => Topic started by: Mikenoangelo on 09 November, 2019, 09:44:15 PM



Title: Lancia Lubrication plate - possibly Edwardian FOC
Post by: Mikenoangelo on 09 November, 2019, 09:44:15 PM
A chum gave me this Lancia lubrication plate, in Italian, French and English.

Height 155mm x width 53mm. Made of brass with raised lettering which is only just visible due to patination. I have not attempted to clean it but have no doubt if it were cleaned the writing would be perfectly clear as can be seen from the brass rubbing kindly made by my wife, and the plate usable on the appropriate car.

If anyone recognises it I'd like to know which Lancia model it comes from, and if anyone has a use for it please let me know and you may have it FOC, rather than it lying forlorn in some drawer as it has done for many years. I wonder if it is from one of the Edwardian models?

Mike



Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: Dikappa on 10 November, 2019, 04:45:57 PM
I'm not 100% sure but think it's a Lambda plate, which is still missing on my project.  So I would love to give it some use!


Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: Mikenoangelo on 10 November, 2019, 10:21:44 PM
If it is Lambda you are welcome to it but looking at the attached picture from an earlier post on the forum the Lambda plate does not look the same - although they may have changed from year to year. Can a Lambda owner have a look please?

Mike


Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: frankxhv773t on 11 November, 2019, 06:36:16 PM
Here is a picture of a 1926 6th series which has plates similar to the one on offer here.


Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: Dikappa on 11 November, 2019, 07:13:51 PM
I asked a friend with also an 8th series and he will check...there seem to be two plates normally, the longisch one as in this topic and a bigger one.


Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: Mikenoangelo on 14 November, 2019, 11:10:24 AM
Koen - seems like you win the raffle!!
If you send me a PM with your address etc I will post it to you. Glad it is to find a good home.

Mike


Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: simonandjuliet on 14 November, 2019, 04:07:50 PM
Well done Koen (and Mike for your generosity !)

However, if anyone has a set of the Aprilia info plates in good condition, as per above, I would be interested - my Cabrio plates are OK but could be better

I only need the 2 large ones, Thanks


Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: Dikappa on 19 December, 2019, 05:17:16 PM
The plate arrived in Belgium today, with thanks to Mike for sending it over.  You'll see it appear someday in the Lambda project!


Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: Mikenoangelo on 19 December, 2019, 10:07:55 PM
Good news Koen!
Mike


Title: Re: Lancia Lubrication plate - possibly Edwardian FOC
Post by: Tony Stephens on 28 December, 2019, 09:40:58 AM
I could do with the Lambda one (have repros of the other two) and am also keeping an eye open for an Aprilia set (early). Or a refurbishment technique which is not too time-consuming.