Lancia Motor Club

Model Technical and Interest => Aurelia => Topic started by: Parisien on 26 October, 2019, 04:49:24 PM



Title: Aurelia B 12 project, in Italy
Post by: Parisien on 26 October, 2019, 04:49:24 PM
https://www.subito.it/auto/lancia-aurelia-b12-modena-313006891.htm

Interesting project to finish, note the plated bumpers, and skeletal seats.

P


Title: Re: Aurelia B 12 project, in Italy
Post by: chriswgawne on 26 October, 2019, 06:51:58 PM
Long way to go....and at quite a cost but it will be worth it if the work is done properly as the saloons are so good to drive.
Chris


Title: Re: Aurelia B 12 project, in Italy
Post by: lancialulu on 26 October, 2019, 09:04:49 PM
Long way to go....and at quite a cost but it will be worth it if the work is done properly as the saloons are so good to drive.
Chris
when I bought mine Ade said its air cleaner was on wrong, just like this car?.?.?.? Not sure who is right now.....


Title: Re: Aurelia B 12 project, in Italy
Post by: Parisien on 26 October, 2019, 09:22:25 PM
My B12 Air cleaner, circa 2011....and now other B12 owners will have to get theirs chromed too ;D

P


Title: Re: Aurelia B 12 project, in Italy
Post by: Sliding Pillar on 27 October, 2019, 07:59:53 AM
The correct position for the B12 air filter is longitudinally as in Franks photo. It is shown like this in the factory brochure and in the original photos I have of my car when it was owned by Lancia (England) at Alperton.


Title: Re: Aurelia B 12 project, in Italy
Post by: lancialulu on 27 October, 2019, 01:41:53 PM
There is another anomoly.... Frank's picture shows the hear tap on the left whereas my car it is on the right. I replaced the hoses and top rad casting but made sure the tap exited right as per owners handbook!!


Title: Re: Aurelia B 12 project, in Italy
Post by: chriswgawne on 27 October, 2019, 06:33:38 PM
Isn't Frank's car a lhd B12S? His front wiring loom is also on the opposite side to my rhd B12.
 Chris


Title: Re: Aurelia B 12 project, in Italy
Post by: Parisien on 27 October, 2019, 06:44:13 PM
Isn't Frank's car a lhd B12S? His front wiring loom is also on the opposite side to my rhd B12.
 Chris

Correct, hence the noted variation.

P