|
Title: 2000 saloon hubcaps Post by: Richard Fridd on 06 February, 2008, 02:32:43 PM wanted ;flavia 2000 saloon hubcaps to suit steel wheels
Title: Re: 2000 saloon hubcaps Post by: frankxhv773t on 05 March, 2008, 12:02:31 AM Did you find some hub caps? I have some Beta 1300 coupe ones which look similar to 2000 sedan ones. You are welcome to them if they are any good. Contact me at f.tierney@btinternet.com
FRANK Title: Re: 2000 saloon hubcaps Post by: Richard Fridd on 05 March, 2008, 10:16:22 AM thanks Frank.this seems like progress!have sent you an email.does anyone else know if these will fit[as mentioned in previous flavia post?]any advice very welcome . best regards richard
Title: Re: 2000 saloon hubcaps Post by: Richard Fridd on 04 September, 2008, 05:25:04 PM no progress has been made after all so hubcaps still reqd. for purchase.hope all is well frank
Title: Re: 2000 saloon hubcaps Post by: Running Board on 04 September, 2008, 07:02:14 PM Richard,
I think that I may have some: I broke up a 2000 Sedan for spares about 30 years ago! This was not actually a Flavia but was the flat-four engined type with a shield-shaped grille simply known as a "2000" (i.e. pre Beta range). I'll have a look tomorrow to see if I can find them. Morris. Title: Re: 2000 saloon hubcaps Post by: Running Board on 08 September, 2008, 07:45:52 PM I have found three only I'm afraid, Richard. If you would like them, let me know.
Morris. Title: Re: 2000 saloon hubcaps Post by: Richard Fridd on 09 September, 2008, 05:12:30 PM thanks Morris.thats a big step forward.please let me have details of cost and address and i will send you a cheque. best regards richard
Title: Re: 2000 saloon hubcaps Post by: Running Board on 10 September, 2008, 10:17:29 PM Just send me a PM with your address Richard and I'll get them in the post to you.
Morris. Title: Re: 2000 saloon hubcaps Post by: JohnMillham on 11 September, 2008, 08:09:52 AM I think I have some new ones. At least two sets, if my memory serves me correctly. I'll take them to the Autojumble at Beaulieu at the weekend and see if anyone can confirm what they fit.
Regards, John Title: Re: 2000 saloon hubcaps Post by: Richard Fridd on 11 September, 2008, 06:21:51 PM thanks john please let me know. i wont have access to the forum till next saturday though.but i can receive a text on 07957 292127.i hope you enjoy the auto jumble!
Title: Re: 2000 saloon hubcaps Post by: Richard Fridd on 09 October, 2008, 06:12:04 PM hope you are ok Morris. i have sent you a pm with my address again incase the first one did not arrive. best regards richard
Title: Re: 2000 saloon hubcaps Post by: frankxhv773t on 10 October, 2008, 09:52:33 PM Richard, I don't go on the forum regularly so I haven't been keeping up with this. I hope you have a nice shiney set of hub caps coming together.
FRANK Title: Re: 2000 saloon hubcaps Post by: Richard Fridd on 11 October, 2008, 07:02:11 AM running board has informed me that 3 are on their way,thanks Morris.so will still need another from somewhere.also i am still wondering how they are fastened to the wheels?
Title: Re: 2000 saloon hubcaps Post by: Richard Fridd on 16 October, 2008, 05:47:43 PM hubcaps have arrived!thanks Morris.i am wondering if they do not attach to the wheels but to hub centres[?] so need to think of a method of converting to fulvia centres if this is the case.i may have confused the issue more as i have machined the wheel centres to fit the fulvia hubs.anyhow looking forward to a solution as they do look good in my opinion!
|