Title: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Parisien on 28 June, 2018, 11:29:21 AM The LMC recieved this email from Piet, can anyone help? Please pm me for his email/phone number.
P Hi Lancia Motor Club UK, I am currently restoring the car in the header. I am a member of Lancia Club Netherlands (C1608 membernumber). I have heard that there are aluminium front- and rear brake calipers as a subsitute for the Dunlop's produced in the UK. Where can I buy them? Which member of your club is specialized in Flavia's? Thanks in advance and kind regards, Piet Piet Duivenvoorden Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: chriswgawne on 28 June, 2018, 06:17:01 PM I presume Piet means wheel cylinders?
If so, I haven't heard of new aluminium ones but I know that stainless steel versions are produced in Germany (I think). However the last new one I bought from Cavalitto a couple of years ago was steel as originals. Chris Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Parisien on 28 June, 2018, 07:17:14 PM I shall clarify with him, thanks Chris.
P Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Sebastien on 28 June, 2018, 07:23:51 PM I think Piet is looking for those:
http://viva-lancia.com/specials/dunlop-pots/wheelbrakecilinders.htm A relative of mine has fitted them to his 1st series Fulvia Sport, and is very happy with them! Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Parisien on 28 June, 2018, 08:43:07 PM I shall relay this post to Piet also, thanks Sebastien
P Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Parisien on 28 June, 2018, 10:19:12 PM This set at Viva Lancia is 2015 EUR which is roughly 1,781.84 GBP. Someone told me there are aluminum versions for 75 GPB each from the UK.
Response from Piet, so unless someone else knows more than Chris and Sebastien, the expensive versions look to be the main options. P Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: neil-yaj396 on 29 June, 2018, 06:07:24 AM Frank
Why not forward the emails to Colin Clamp, guru of all things Flavia? His email address is in the back of VL. Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Parisien on 29 June, 2018, 10:17:22 AM I'll pass that on Neil, cheers.
P Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Charles Frodsham on 29 June, 2018, 01:09:43 PM B G Developments make anodised aluminium wheel cylinders.....I have got them on my Flaminia.....superb!
Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Sebastien on 29 June, 2018, 01:47:02 PM B G Development wheel cylinders look very similar to the ones sold by Huib Geurink (viva-lancia link above):
http://www.bgdevelopments.co.uk/products-sp-720548214/dunlop-piston-cylinder-assemblies How do they look pricewise? Also expensive I would think! Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Brian Long on 02 July, 2018, 05:36:24 AM In Australia we tend to have the caliper pots resleeved in stainless steel. Not a difficult job for a competent workshop/brake specialist.
Brian Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Parisien on 02 July, 2018, 08:02:09 AM Thank again guys for suggestions, will pass them on.
P Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: peterbaker on 02 July, 2018, 01:43:21 PM Worth bearing in mind early Flavia brakes share much if not all in common with MK2 Jaguar.
Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: Parisien on 03 July, 2018, 08:01:07 AM Cheers, Peter.
P Title: Re: Front and Rear Brake Calipers (8) for Lancia Flavia Pininfarina Coupe 1964 Post by: bobhenry999 on 11 July, 2018, 09:10:07 PM As some of you know, I have a 1963 Flavia 815 Coupe with the early Dunlop braking system. I have had both the master cylinder rebuilt successfully at a company in Bury St Edmunds.
They have also rebuilt numerous classic motor bike calipers and master cylinders of mine over the years, so I can speak with absolute confidence in their work. They are "Past Parts Ltd". Telephone 01284 750729, and the chap I always deal with is Nigel. I have no connection with this company other than always being happy with their work. Bob |