Lancia Motor Club

Model Technical and Interest => Ypsilon, Musa and Y10 => Topic started by: frankxhv773t on 28 September, 2015, 09:36:10 AM



Title: Y10 rear axle rust.
Post by: frankxhv773t on 28 September, 2015, 09:36:10 AM
Following on from "Mystery Fitment" I have repaired the bump stop turrets inside the rear springs on my Y10. The turret is a separate pressing welded into the lower spring cup. Mine having rusted away all around the base on both sides I was thinking of a second hand rear omega beam but got a grip, decided to stop being a wimp and have ago at making something. The result isn't pretty but it does seem to be strong. (I have a long way to go before I reach Parry Perfection in my welding ability.)


Title: Re: Y10 rear axle rust.
Post by: the.cern on 28 September, 2015, 04:36:56 PM
Excellent Frank ..... they certainly look as though they will do the business. Let's face it, there are many areas in a car where 'doing the job' is far more important than 'looking pretty'!!!

                                            Andy


Title: Re: Y10 rear axle rust.
Post by: simonandjuliet on 28 September, 2015, 06:49:22 PM
Nice bit of fabrication


Title: Re: Y10 rear axle rust.
Post by: DavidLaver on 28 September, 2015, 07:03:32 PM

Respect!!!   Looks like it could have come from Zagato or Abarth.


Title: Re: Y10 rear axle rust.
Post by: frankxhv773t on 30 September, 2015, 08:45:52 AM
Or Lancia. I saw a B24 at Omicron many years ago having front end crash damage repaired. The front wing was removed and I suggested the welding on the inner wing showed a badly botched previous repair but Martin told me that was the standard original welding.