Lancia Motor Club

Buy, Sell and Search => Spares required => Topic started by: angelorange on 18 February, 2012, 10:38:39 AM



Title: Final Drive 10/41
Post by: angelorange on 18 February, 2012, 10:38:39 AM
Looking for 10/41 Final Drive (Crown and pinion) from S2 berlina in good condition

NB there were 2 types of pinion on S2 gearboxes:

- 1° solution:
1°  D=47 mm
1°  D=47 mm
1°  D=47 mm
1°  D=47 mm
 
- 2° solution:
1°  D=48 mm
1°  D=48 mm
1°  D=46 mm
1°  D=43,5 mm
 


Title: Re: Final Drive 10/41
Post by: JohnMillham on 18 February, 2012, 01:44:24 PM
How do you get the "degree" symbol? I've never been able to find one! Regards, John


Title: Re: Final Drive 10/41
Post by: Richard Fridd on 18 February, 2012, 03:34:06 PM
Alt and 0176 according to yahoo?


Title: Re: Final Drive 10/41
Post by: JohnMillham on 18 February, 2012, 03:49:31 PM
Thanks Richard, I'll use it quite often
 Regards, John


Title: Re: Final Drive 10/41
Post by: Richard Fridd on 18 February, 2012, 04:35:47 PM
Also there is the 'sym' button  for various ±=^~ symbols on a blackberry albiet I can't see a 'degree'but there is a way of sending a degree symbol from a PC and saving it according to the blackberry forum


Title: Re: Final Drive 10/41
Post by: Richard Fridd on 18 February, 2012, 04:46:52 PM
I suspect that peter de pascale has one if I remember his ad in VL correctly about a year ago which was for a sedan S2 with lots of spares(in kent)


Title: Re: Final Drive 10/41
Post by: angelorange on 18 February, 2012, 07:41:12 PM
Thanks Richard - this thread was becoming  a lesson in typing!

Would you send me his contact details via email?  Thanks



Title: Re: Final Drive 10/41
Post by: ncundy on 18 February, 2012, 08:33:11 PM
Can't help with the FD I'm afraid, but is it possible to identify which box is which from the numbers?

Neil


Title: Re: Final Drive 10/41
Post by: Richard Fridd on 18 February, 2012, 10:12:17 PM
Thanks Richard - this thread was becoming  a lesson in typing!

Would you send me his contact details via email?  Thanks


VL now in archive but will look up peters details


Title: Re: Final Drive 10/41
Post by: angelorange on 26 February, 2012, 01:55:46 PM
Alas it seems there is no way from gbox serial nos to tell which version of pinion shaft an S2 box has without pulling it apart.



Title: Re: Final Drive 10/41
Post by: Richard Fridd on 26 February, 2012, 04:30:25 PM
PM sent with details of tel no just incase the vendor still has one.best regards richard