Lancia Motor Club

Model Technical and Interest => Aprilia, Ardennes and Ardea => Topic started by: davidwheeler on 08 October, 2011, 03:26:02 PM



Title: Andre telecontrol shock absorber fitting.
Post by: davidwheeler on 08 October, 2011, 03:26:02 PM
I am rebuilding the Andre Telecontrol rear shock absorbers that came in a box with my car 41 years ago.   They have never been fitted properly to this car insofar as I know and I would like to know where to put the pressure pump, pressure gauge and reservoir.  If anyone has these as an original fitting,  please can you post some photos?  The fitting of the shocks themselves is no problem as there are suitable holes and bits to do it.  I did once have them fitted but without the pressure adjustment.
David


Title: Re: Andre telecontrol shock absorber fitting.
Post by: BlueSky on 10 October, 2011, 04:12:17 AM
Hi David,
This is how they are fitted to my car. I've seen a few others with the reservoir mounted in a similar spot under the bonnet. I've also got a copy of the instruction manual here:
http://www.narrywoolan.com.au/home/Publications.html
Hope this helps.
Noel


Title: Re: Andre telecontrol shock absorber fitting.
Post by: davidwheeler on 10 October, 2011, 04:45:29 PM
Thanks very much, this explains the bracket I have also.  I have taken the liberty of posting your pictures in the technical information thread.
David


Title: Re: Andre telecontrol shock absorber fitting.
Post by: davidwheeler on 27 August, 2012, 03:36:16 PM
Thinly spread the biscuits with Best British Dripping.  Re assemble and pressurize to taste.  Go for a test drive down your local rural roads and experience a new creamy smoothness.  I've got it right at last after only 42 years!


Title: Re: Andre telecontrol shock absorber fitting.
Post by: the.cern on 27 August, 2012, 08:34:55 PM
Once you have walked away from the car and darkness falls, mice and all sorts of wee beasties will be trying to get at your dripping !!!!

So pleased to hear that you have it all sorted and after only 42 years, seems I have just 1 more year before the Gussie must be finished to keep pace with you !!!!

                          Andy