|
Title: Worn Oil pump/Dist. Gear Post by: LatheJon on 20 November, 2023, 03:36:58 PM Hello, On my Engine the Gear which is attached to the Distributor drive shaft also drives the oil pump held in place with a pin, is badly worn. Do any owners know if these Gears are are available?
Many Thanks John Title: Re: Worn Oil pump/Dist. Gear Post by: simonandjuliet on 21 November, 2023, 08:41:29 AM Can you post a photo and/or count the teeth - I have some new gears but need to check if it's the correct one
Title: Re: Worn Oil pump/Dist. Gear Post by: LatheJon on 21 November, 2023, 09:46:04 AM Thanks Simon, The Gear has 18 teeth, about 30mm dia, 24mm high, on a 14mm shaft.
Regards, John Title: Re: Worn Oil pump/Dist. Gear Post by: simonandjuliet on 23 November, 2023, 02:00:53 PM Unfortunately the only gears that are new are for the oil pump ... sorry. I may be able to find a good S/H distributer drive, but you probably need the crankshaft gear as well ?? Again I will have S/H crank gears
Title: Re: Worn Oil pump/Dist. Gear Post by: Sebastien on 23 November, 2023, 03:35:32 PM Have you tried Cavalitto?
See for example: https://www.oldlanciaspares.com/997-lancia-APRILIA-ricambio-ingranaggio-comando-pompa-olio.php He can also organize spares which are not on his website. Title: Re: Worn Oil pump/Dist. Gear Post by: Jay on 23 November, 2023, 03:58:24 PM I would say only about 5% of his stock is on the Cavalitto site
Title: Re: Worn Oil pump/Dist. Gear Post by: Hendrik on 14 December, 2023, 09:19:50 PM I have these 2…
|